Supplier for KaramSeamless Frontier cotton knitted gloves from Karam for light handling, ambidextrous with a knit wrist and hem; no test standard is listed. Sold as FT601, FT602, FT603, FT611, FT613 and FT615 in 7 or 10 gauge, 40 to 90 grams, in natural white, navy blue or grey melange.
Sizes: 7 Gauge, 10 Gauge
| Specification | 7 Gauge | 10 Gauge | Product Codes |
|---|---|---|---|
| Product Codes | 7 Gauge | 10 Gauge | Product Codes |
| Shell Weight / Dozen Pair | 480 |
Specifications as published by Karam. Please confirm the exact model with us before ordering.
Karam work gloves with a crinkle finish latex palm on a seamless polyester liner, for a firm grip on rough or wet items, stated to EN 388:2016. HS01 has an orange liner with black latex (Prokut range); HS02 is brown and black, in sizes M and L.
Sturdy Karam latex gloves on a polycotton liner with a crinkle latex coating for grip, stated to EN 388:2016. HS11 (white liner, orange latex) is dipped over 70% of the back of the hand including the thumb; HS03 (dark and light blue) comes in sizes M and L.
Thin Karam gloves with a polyurethane (PU) palm on a seamless polyester liner, made low lint for clean, delicate work such as electronics and pharma handling, stated to EN 388:2016. HS21 is white and HS22 is black, the HS22 in M, L and XL (240, 250 and 260 mm long).
Karam general purpose gloves with a polyurethane palm on a polyester liner, giving good grip in dry and mildly oily conditions, stated to EN 388:2016. HS23 is white and HS24 is black, both in sizes M and L.
A Karam glove with a smooth grey nitrile coating on a white, seamless, low lint polyester liner, holding a sure grip on oily components, stated to EN 388:2016. Sizes M, L and XL (240, 250 and 260 mm long).
Flexible Karam work gloves with a flat nitrile palm coating on a polyester liner, for a sure grip in dry and oily work, stated to EN 388:2016. HS32 is white and grey; HS33 is black and lilac with a knit wrist; both in sizes M and L.
Heavy duty cut resistant gloves on a high performance polyethylene liner, with a double nitrile coating for oily work and thermoplastic (TPR) guards on the back and fingertips against knocks. Rated EN 388 4X43DP and ANSI/ISEA 105 A4.
Cut resistant gloves knitted from Delta Plus Xtrem CUT high performance fibre at gauge 13, with a gritty foam nitrile coating on the palm and fingertips. Rated EN 388 4X43F and ANSI/ISEA 105 A6.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
