Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Dealer for HoneywellHoneywell HPF24S6E Remote Fire Alarm Power Supply, 6 Amp
A compact 6 amp remote power supply with a battery charger that connects to any 12 V or 24 V fire alarm control panel, or works on its own.
- 6 amp remote power supply with battery charger
- Connects to any 12 V or 24 V fire alarm control panel, or stands alone
- Expands notification appliance circuits (NACs), including NAC synchronisation
- Auxiliary power for 24 V system accessories
- Trouble contact rated 5.0 A at 24 VDC
- UL 864, UL 1481, NFPA 72 and ULC-S527 listed; FM approved
Standards and approvals: UL 864, UL Listed, UL 1481, NFPA 72, ULC-S527, FM Approved
Specifications
Specifications
| Specification | Details |
|---|---|
| Primary (AC) Power | HPF24S6/8(C): 120 VAC 60 Hz, 3.2 A maximum | HPF24S6/8E: 220/240 VAC, 50 Hz, 1.6 A maximum | Wire size: minimum 14 AWG (2.0 mm²) with 600V insulation |
| Control Input Circuit | Trigger Input Voltage: 9.0 to 32 VDC | Trigger Current: 2.0 mA (16 - 32 V) | (per input) 1.0 mA (9 - 16 V) |
| Trouble Contact Rating | 5.0 A at 24 VDC |
| Auxiliary Power Output | Special Application | Power - 500 mA maximum |
| Output Circuits | +24 VDC filtered, regulated | 3.0 A maximum for any one circuit | 4.0 A maximum total continuous current for all outputs (Stand-alone mode) for the HPF24S6 and 6A for the HPF24S8 | 6A or 8A (depending on model) maximum total short-term current for all outputs (NAC | Expander mode) |
| Secondary Power (Battery) Charging Circuit | Supports lead-acid batteries only | Float Charge Voltage: 27.6VDC | Maximum Charge Current: 1.5 A | Maximum Battery Capacity: 18 AH |
Specifications as published by Honeywell. Please confirm the exact model with us before ordering.
More Honeywell Connectivity & Power Supplies
Honeywell CLSS Gateway Modbus Feature (HON-CGW-MBB)
A feature of the CLSS Gateway HON-CGW-MBB that links networks using the Modbus/TCP protocol to fire alarm control panels on an NFN network.
Honeywell CLSS Gateway BACnet Feature (HON-CGW-MBB)
A feature of the CLSS Gateway HON-CGW-MBB that links BACnet/IP networks to fire alarm control panels on a NOTI-FIRE-NET (NFN) network.
Fire Alarm Accessories and Test Equipment from other brands
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.
System Sensor
System Sensor S300PTU Programming and Test Tool (Series 300)
A menu driven hand-held tool for System Sensor Series 300 conventional detectors, giving access to detector functions and logs.
System Sensor
System Sensor M200E-SMB Surface Mounting Box for Addressable Modules
A surface mounting enclosure for System Sensor addressable input and output modules. The base is fixed to the wall, then the module and cover are screwed on with the two screws supplied.