Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Dealer for NotifierNotifier NFN-GW-PC-W NOTI-FIRE-NET Gateway
An intelligent gateway that links an ONYXWorks workstation to a NOTI-FIRE-NET network for full monitoring, control, panel programming and network diagnostics.
- Workstation sees alarm, pre-alarm, trouble and disabled events
- Acknowledge, silence, reset, enable/disable and activate/deactivate control
- Panel programming upload, download and changes
- Supervised IP connections; several workstations can use it at once
- Compatible with ONYXWorks and ONYX FirstVision
- UL/ULC listed, with CSFM and MEA listings
Standards and approvals: UL/ULC Standards and NFPA 72 Fire Alarm Systems, UL / ULC: S5697, CSFM: 7300-1525:103, MEA: 286-07-E
Specifications
Specifications
| Specification | Details |
|---|---|
| PC version | • Requires an ONYXworks® Workstation (see ONYXworks® data sheet DN-7048). • Operating temperature: 0°C to 49°C (32°F to 120°F). |
| Embedded version | • Input current: 450 mA @ 24 VDC. • Input voltage range: 19 VDC to 29 VDC. • Operating temperature: 0°C to 49°C (32°F to 120°F). • Mounts on a CHS-4L chassis in a CAB-4 Series cabinet (see data sheet DN-6857). • Direct connection to NFS2-640, NFS-640, NFS-320, NFS2-3030, and NFS-3030 fire alarm control panels. |
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Networking & Graphics
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Notifier HS-NCM-SF High-Speed Network Communication Module, Single-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over single-mode fibre-optic cable.
Notifier HS-NCM-WMF High-Speed Network Module, Wire to Multi-Mode Fibre
Joins twisted-pair wire and multi-mode fibre-optic segments on the same High-Speed NOTI-FIRE-NET network.
Notifier HS-NCM-WSF High-Speed Network Module, Wire to Single-Mode Fibre
Joins twisted-pair wire and single-mode fibre-optic segments on the same High-Speed NOTI-FIRE-NET network.
Notifier HS-NCM-MFSF High-Speed Network Module, Multi-Mode to Single-Mode Fibre
Joins multi-mode and single-mode fibre-optic segments on the same High-Speed NOTI-FIRE-NET network.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.
System Sensor
System Sensor S300PTU Programming and Test Tool (Series 300)
A menu driven hand-held tool for System Sensor Series 300 conventional detectors, giving access to detector functions and logs.
System Sensor
System Sensor M200E-SMB Surface Mounting Box for Addressable Modules
A surface mounting enclosure for System Sensor addressable input and output modules. The base is fixed to the wall, then the module and cover are screwed on with the two screws supplied.