Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Dealer for NotifierNotifier ONYX FirstVision LCD Touchscreen for Fire Fighters
A wayfinding touchscreen for fire fighters and emergency responders that graphically shows where a fire started, how it is spreading and key building information.
- 22 inch LCD touchscreen
- Shows activated detectors and the order they activated, for one or more buildings
- Floor plans, water supplies, evacuation and access routes, hazards and shutoffs
- Connects to ONYX panels or NOTI-FIRE-NET through the NFN gateway over Ethernet
- Supports multiple gateways; on-board Ethernet, USB and one software licence
- UL/ULC listed, with MEA and CSFM listings; 0°C to 50°C
Standards and approvals: UL/ULC Listed: S5697, MEA: 286-07-E, CSFM: 7300-1525:0103
Specifications
Specifications
| Specification | Details |
|---|---|
| Enclosure Dimensions | 24.53" W X 21.92" H X 3.47" D (62.30 cm H x 55.68 cm W x 8.81 cm D). |
| Door Dimensions | 26.70" W X 23.06" H X 0.41" D (67.81 cm H x 58.57 cm W x .10 cm D). |
| Power Requirements | Regulated, filtered 24 VDC @ 3.0 A via non-resettable power supply, UL Listed for fire-protec- tive signaling use. |
| Temperature Range | 0°C to 50°C (32°F: 120°F). |
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Networking & Graphics
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Notifier HS-NCM-SF High-Speed Network Communication Module, Single-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over single-mode fibre-optic cable.
Notifier HS-NCM-WMF High-Speed Network Module, Wire to Multi-Mode Fibre
Joins twisted-pair wire and multi-mode fibre-optic segments on the same High-Speed NOTI-FIRE-NET network.
Notifier HS-NCM-WSF High-Speed Network Module, Wire to Single-Mode Fibre
Joins twisted-pair wire and single-mode fibre-optic segments on the same High-Speed NOTI-FIRE-NET network.
Notifier HS-NCM-MFSF High-Speed Network Module, Multi-Mode to Single-Mode Fibre
Joins multi-mode and single-mode fibre-optic segments on the same High-Speed NOTI-FIRE-NET network.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.
System Sensor
System Sensor S300PTU Programming and Test Tool (Series 300)
A menu driven hand-held tool for System Sensor Series 300 conventional detectors, giving access to detector functions and logs.
System Sensor
System Sensor M200E-SMB Surface Mounting Box for Addressable Modules
A surface mounting enclosure for System Sensor addressable input and output modules. The base is fixed to the wall, then the module and cover are screwed on with the two screws supplied.