Siemens FDAI93 Cerberus PRO Remote Alarm Indicator, Flush Mounted
A transparent flush indicator lamp connected in parallel to automatic fire detectors, made to fit into door frames, switching panels, ceiling voids or special housings.
Dealer for SiemensSiemens FDAI92 Cerberus PRO Remote Alarm Indicator, Surface Mounted
A wall mounted alarm indicator connected in parallel to automatic fire detectors that are not easy to see, which lights as soon as a connected detector alarms.
- Connected in parallel to automatic fire detectors
- Lights as soon as a connected detector gives an alarm
- Screwless terminals, wall mounting
- DC 5 to 8 V, 35 mA; IP40; 85 x 85 x 28 mm
- Ex classification listed: Ex ib IIC T6 / T5
- Siemens lists DNV, MED and UKCA
Standards and approvals: DNV, MED, UKCA
Specifications
Specifications
| Specification | FDAI92 |
|---|---|
| Protection category | IP40 |
| Operating voltage | DC 5…8 V |
| Operating temperature | -25…80 °C |
| Operating current | 35 mA |
| Relative humidity | ≤95 % rel. |
| Cable capacity | Max. 1,5 mm2 |
| Ex-classification | Ex ib IIC T6 (Ta ≤ 55 °C) Ex ib IIC T5 (Ta ≤ 70 °C) |
| Dimensions (W x H x D) | 85 x 85 x 28 mm |
| Color | Pure white, ~RAL 9010 |
| Number of addresses | 0 |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Accessories & Test Equipment
Siemens FDCAI221 Cerberus PRO Addressable Alarm Indicator
An addressable alarm indicator that sits on the FDnet or C-NET loop and can be programmed to show the source of an alarm from detectors that are hard to see.
Siemens FDUL221 Line Tester for FDnet and C-NET Detector Lines
A universal tester for installed FDnet and C-NET fire detection lines when no control unit is connected yet, for electricians, installers and service technicians.
Siemens FDUL2901 Fire Field Assist Line Tester
An advanced line tester for Siemens Sinteso, Cerberus PRO and Cerberus FIT systems that works with the Building X Fire Install app.
Siemens FDUD2912 Electronic Detector Tester
A handheld tool for inserting, removing, testing and commissioning Sinteso, Sinteso Nova and Cerberus Nova detectors and call points.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.