Authorised distributor for SavemaxRubberised reinforced lined fire hose to IS 636, supplied with stainless steel instantaneous couplings already fitted so it can go straight into a hose box or cabinet. It comes in 15 m and 30 m lengths.
Standards and approvals: IS 636, BIS/ISI Marked, CPWD Approved
Sizes: 15m, 30m
| Specification | 15m | 30m |
|---|---|---|
| Type | RRL Type-A | RRL Type-A |
| Diameter | 63mm | 63mm |
| Coupling | Stainless Steel Instantaneous | Stainless Steel Instantaneous |
| Standard | IS 636 (Fire Hose: Unlined and Lined) | IS 636 (Fire Hose: Unlined and Lined) |
| Ideal For | Hose boxes, wet riser systems, fire brigade hydrant connections, industrial hydrant points | Hose boxes, wet riser systems, fire brigade hydrant connections, industrial hydrant points |
| Certifications | BIS/ISI Marked | CPWD Approved | BIS/ISI Marked | CPWD Approved |
Specifications as published by Savemax. Please confirm the exact model with us before ordering.
A single outlet landing valve in stainless steel, the standard choice for most wet riser systems. It is installed at each floor landing with a 63 mm outlet for connecting the fire hose.
A dual outlet stainless steel landing valve for floor landings where two hose lines may have to run at the same time. It is typically specified for high risk occupancies, large floor plates and basements.
The fitting on the end of a fire hose that controls the discharge pattern and flow of water, made in stainless steel. It fits standard 63 mm RRL hose couplings and gives a jet or spray for direct attack or cooling.
A swinging arm first aid hose reel, permanently connected to the building's water supply so one person can use it within seconds. The hose can be pulled out in any direction through 180°, reaching a wide area around the reel.
A first aid hose reel built to the BIS specification IS 884 for installation in buildings as per NBC requirements. Savemax notes that this type is mandatory in most government and CPWD specified projects.
An external fire brigade inlet, also called a Siamese connection, with two connections feeding one internal riser, fitted on the facade or boundary wall. It lets the fire brigade pump water from its tanker into the building's wet riser or sprinkler system.
A complete delivery hose coupling made to IS 903 with the ISI mark, in bronze (gunmetal) or stainless steel. The website lists it as a push type coupling for 65 mm hose, tested to 21 kg/cm2; the product list gives 63 mm.
Sizes: 63 mm
A spare coupling for landing valves, used to replace a worn or damaged outlet coupling. Size 63 mm, in stainless steel or gunmetal.
Delivery hose coupling to BS 336 and IS 903, in gunmetal, aluminium alloy or stainless steel, with a ribbed or multi serrated tail.
Sizes: 3″, 4”, 5”, 5.5”
Suction hose coupling to BS 336 and IS 903 in gunmetal, aluminium alloy or stainless steel, in 3 inch, 4 inch, 5 inch and 5.5 inch sizes.
Instantaneous male and female coupling pair for 63 mm fire hoses, made as per IS:903 and ISI marked. Available in gunmetal, stainless steel or aluminium.
Sizes: 63 mm
Non-percolating, rubber lined delivery hose with a circular woven synthetic jacket, conforming to IS:636 Type 1 and ISI marked. Supplied in 7.5, 15 and 30 m lengths with IS:903 instantaneous couplings bound with copper wire.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
