Bosch FMX5000 IR VK Triple IR Flame Detector (922819)
A triple infrared flame detector for open flames indoors and outdoors, in an aluminium housing, for non-hazardous areas.
Dealer for BoschBosch FCS-LHD-2EN Conventional Linear Heat Detector with LCD
A conventional linear heat detector with an LCD display for protecting commercial and industrial areas, including cramped spaces and extreme environments.
- Rate-of-rise and configurable fixed heat alarm detection
- Commissioning with the built-in LCD display
- Continuous self-monitoring of the sensor cable
- IP 65 rated enclosure, environmental class II (EN 50130-5)
- Operating voltage 20 to 30 V DC; size in mm (H x W x D): 180 x 182 x 90
- Bosch lists VdS, UL and CNBOP certificates
Standards and approvals: CNBOP, UL, VdS
Specifications
Specifications
| Specification | FCS-LHD-2EN |
|---|---|
| Weight (g) | 860 |
| Operating voltage (VDC) | 20 to 30 |
| Operating temperature (°C) | -20 to 50 |
| Dimensions (H x W x D) (mm) | 180 x 182 x 90 |
| Operating relative humidity, non-condensing (%) | 0 to 95 |
| Environmental class (EN 50130-5) | II |
| Color | Gray |
| Material | Plastic |
Specifications as published by Bosch. Please confirm the exact model with us before ordering.
More Bosch Flame & Specialist Detection
Bosch FMX5000 IR Ex Intrinsically Safe Triple IR Flame Detector, Zones 1, 2, 20, 21, 22 (911674)
An intrinsically safe (Ex i) triple infrared flame detector for open flames in Ex zones 1, 2, 20, 21 and 22.
Bosch FMX5000 IR 3GD Increased Safety Triple IR Flame Detector, Zones 2 and 22 (924420)
An increased safety (Ex e) triple infrared flame detector for Ex zones 2 and 22. Bosch's page gives no technical data table for this part.
Bosch IR3 Flame Detector, EN 54-10 Class 1, Blue (016589)
A multi-wavelength infrared flame detector for open flames indoors and outdoors, meeting EN 54-10 Class 1 sensitivity.
Bosch IR3 Flameproof Flame Detector, Ex d, Zones 1, 2, 21 and 22, Red (016519)
A flameproof (Ex d) version of the IR3 infrared flame detector for explosive areas in zones 1, 21, 2 and 22, in an aluminium housing.
Bosch OOH740-A9-Ex Dual-Optical Detector for Explosive Areas, Zones 0, 1 and 2
A dual-optical smoke detector for potentially explosive areas in zones 0, 1 and 2, which can be programmed as a dual-optical or a thermal detector with defined resistors.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.