Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.
Dealer for Morley by HoneywellMorley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
- Range 10 to 70 m with the standard 200 x 230 mm reflector
- 70 to 100 m with the BEAM-LRK long range reflector kit; BEAM-SMK surface mount accessory
- Gunsight targeting device for alignment
- 15 to 32Vdc (24Vdc nominal), 2mA typical standby current
- IP54, -30°C to +55°C, 1.77kg
- EN 54-12
Standards and approvals: EN54-12
Download the official Morley by Honeywell catalogue (PDF, 2.3 MB)
Specifications
Specifications
| Specification | MI-LPB2-S3I |
|---|---|
| Weight | 1.77kg |
| Max Wire Gauge for Terminals | 2.5mm2 |
| Colour | White trim, black box |
| Material | Bayblend FR110 trim, Lexan lens cover, Noryl backbox |
| Reflector | 200 x 230mm (10 to 70m range, supplied as standard) |
| Operating Voltage Range | 15 to 32Vdc (24Vdc nominal) |
| Typical Standby Current | 2mA @ 24Vdc (No communications, LED off) |
| Maximum Alarm Current (LED on:) | 8.5mA |
| Maximum Alignment Current | 20mA |
| Operating Temperature Range | -30ºC to +55ºC |
| Humidity | 0 to 95% Relative Humidity (noncondensing) |
| IP Rating | IP54 |
| BEAM-LRK | Long Range reflector kit (70 to 100m range). 3 off 200 x 230mm. |
| BEAM-SMK | Surface Mount accessory |
Specifications as published by Morley by Honeywell. Please confirm the exact model with us before ordering.
More Morley by Honeywell Beam & Aspirating Smoke Detection
Morley by Honeywell Addressable FAAST FLEX Aspirating Smoke Detector, 1 or 2 Channel (MI-FLX-010, MI-FLX-020)
Morley's addressable aspirating smoke detector for small and medium installations such as electrical rooms, data centres and machine rooms, in one or two channel versions.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
System Sensor
System Sensor 6500E Addressable Reflected Beam Smoke Detector
An addressable reflector-type linear optical beam detector that connects directly to an analogue loop, for buildings with large open spaces.
System Sensor
System Sensor 6500SE Addressable Reflected Beam Smoke Detector with Remote Test
The 6500 addressable beam detector with a servo-operated test filter, so both the optics and the electronics can be tested remotely.