ISO 9001:2015 Certified · MSME Registered · Military Engineering Services Registered
Fire Protection System logoFIRE PROTECTION SYSTEMTMFire safety contractors, dealers & distributors · Bhopal, M.P.
EXCELLENCE IN FIRE EXTINGUISHER, FIRE HYDRANT, FIRE ALARM & FIRE SUPPRESSION SYSTEMS
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
Honeywell logoDealer for Honeywell

Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector

VESDA-EAddressableMicrobore tubesIP40UL 268

An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.

  • Divides the protected space into sampling locations to pinpoint the source of smoke
  • Pump supports microbore tube runs of up to 100 m (tube outside diameter 6 mm, inside 4 mm)
  • Three sensitivity settings, field programmable
  • Commissioning with VSC software, where a normalisation step sets the flow parameters
  • Local smoke test ports, and field-replaceable filter, smoke sensor module, pump and rotary valve
  • 18 to 30 VDC supply; ambient 0 to 38°C; UL 268 and FCC listed

Standards and approvals: UL 268, FCC

Ask price & availability

Download the official Honeywell catalogue (PDF, 17.2 MB)

Specifications

Specifications
SpecificationDetailsDetails
Supply Voltage18-30 VDC
Power Consumption @ 24VDCVEA-040-A00-UL VEA-040-A10-UL | Quiescent 1.0 A 1.6 A | Alarm Average 1.0 A 1.6 A | Peak current (scan mode) 3.5 A
AspiratorLinear Vacuum Pump
Dimensions (WHD)13.9 in x 13.2 in x 5.33 in (352 mm x 336 mm x 135.5 mm)
Weight21.8 lbs (9.9 kg) 22.2 lbs (10 kg)
Operating ConditionsAmbient: 32°F to 100°F (0°C to 38°C) | Sampled Air: 32°F to 122°F (0°C to 50°C) | Tested to: +32°F to +120°F (0°C to +49°C) | Humidity: 5% to 95% RH, non-condensing
Microbore Tube SizeNormal Diameter: OD 0.24 in (6 mm), ID 0.16 in (4 mm)
Microbore Tube LengthNormal Diameter: Up to 328 ft (100 m) per tube | Open Area Application: 164 ft (50 m) (Sensitivity: Standard) | Special Application: 98.4 ft - 328 ft (30 m - 100 m) (Sensitivity: Enhanced and High)
Flow MonitoringSingle sampling point and single tube blockage and breakage detection at set intervals
Relays7 programmable relays (latch or non-latch states) | Contacts rated 2 A @ 30 VDC (Resistive)
IP RatingIP40
Cable Access4 x 1” (25 mm) cable entries
Cable TerminationScrew Terminal blocks 0.2 to 2.5 sq mm (24 - 14 AWG)
Pre-alarmsAlert and Action - two pre alarm levels
Fire-1 Alarm Thresholds at the Sampling HoleHigh: 0.5 %/ft (1.6 %/m) | Enhanced: 1.3 %/ft (4.0 %/m) | Standard: 2.5 %/ft (8.0 %/m)
Communication InterfacesUSB 2.0, Ethernet (RJ45), WiFi (802.11 b/g/n)
VEA-040-A00-ULVESDA-E VEA-40 Aspirating Smoke | Detector with LEDs, UL
VEA-040-A10-ULVESDA-E VEA-40 Aspirating Smoke | Detector with 3.5” Display, UL
VER-A40-40-STXVESDA-E VEA 40-Relay Local StaX

Specifications as published by Honeywell. Please confirm the exact model with us before ordering.

More Honeywell Aspirating Smoke Detection

Honeywell Xtralis VESDA Sensepoint XCL Gas Detector

VESDAGas detectorBluetooth

A gas detector in the VESDA range that gives early warning of gases for occupant protection and system monitoring, alongside protection against fire. Its built-in Bluetooth pairs with a smart device app for installation, commissioning and maintenance.

View specifications ›

Beam, Flame and Special Detectors from other brands

See all beam, flame and special detectors ›

Ask price
Call +91 92440 89060Send a text messageEmail usWhatsApp us