Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Dealer for Morley by HoneywellMorley by Honeywell ZXSe Hi-485 Communication Module, PCB Only (795-038-001)
A high integrity network module for ZXSe panels that detects and isolates network wiring faults and acts as a signal repeater, so network loops of up to 12 km can be built.
- Needs an RS485 card fitted in the panel
- Detects and isolates short and open circuits on the network wiring
- Signal repeater and booster
- High integrity loops up to 12 km (39,370 ft)
- Supplied as a PCB only
Download the official Morley by Honeywell catalogue (PDF, 2.3 MB)
Specifications
Specifications
| Specification | 795-038-001 |
|---|---|
| 795-038-001 | Hi-485 Communication Module, PCB Only |
Specifications as published by Morley by Honeywell. Please confirm the exact model with us before ordering.
More Morley by Honeywell Networking & Graphics
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.
Morley by Honeywell TG Graphic Management Software for DXc Panels
PC software that manages incidents in one or more DXc panels and shows the condition of each sensor graphically in real time.
Morley by Honeywell ZXSe RS485 Communication Module (795-004-001)
A two-wire RS485 multi-drop communication card for ZXSe panels, linking networked panels, repeaters or serial peripheral devices.
Morley by Honeywell ZXSe RS232 Communication Module (795-005)
An RS232 card for single point-to-point communication between ZX series panels, or between a ZX2Se or ZX5Se panel and a graphic front end.
Morley by Honeywell ZXSe Graphic Management and Configuration Software (AMX)
Software for ZXSe systems with AUTOLEARN device detection, an offline Windows configuration tool, cause and effect programming and AMX graphics licences for one or up to three panels.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
System Sensor
System Sensor S300PTU Programming and Test Tool (Series 300)
A menu driven hand-held tool for System Sensor Series 300 conventional detectors, giving access to detector functions and logs.
System Sensor
System Sensor M200E-SMB Surface Mounting Box for Addressable Modules
A surface mounting enclosure for System Sensor addressable input and output modules. The base is fixed to the wall, then the module and cover are screwed on with the two screws supplied.