Ravel 24 V DC Power Supply, 5 A
A mains powered 24 V DC power supply rated up to 5 A, with a built in charger for a lead acid backup battery.
Dealer for RavelRavel 24 V DC Power Supply, 2 A
A mains powered 24 V DC power supply rated up to 2 A, with a built in charger for a lead acid backup battery.
- 220 V AC mains input
- 24 V DC output, up to 2 A
- Built in charging for a lead acid backup battery
- Low battery warning by light and tone
- DC output indication
- Enclosure 350 W x 300 H x 100 D (mm)
Specifications
Specifications
| Specification | RE-2APS |
|---|---|
| Mains | 220 VAC, 50 Hz +10%, -15%. |
| Wire size | 1.5 Sq. mm with 600V insulation |
| Charging Voltage | 27.9 VDC. |
| Charging Current | 800mA Max |
| System Quiescent Current | 35mA |
| Output Voltage | 24VDC @ 2A Max. |
| Dimension | 350 Width x 300 Height x 100 Depth (mm) |
| Weight | 7 Kg Max. |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Power Supplies & Accessories
Ravel Response Indicator Plate, 2 Wire
An ivory metal indicator plate with a red LED that shows when a connected detector is in alarm. Ravel lists it for both its multi loop and conventional systems.
Ravel Thermal Printer with Interface Module
A small direct thermal printer with an interface module that connects to the Avani panel over a serial link to print system events and reports.
Ravel Addressable Back Box for Manual Pull Station
A back box with a built in addressable module that connects Ravel's single or dual action manual pull station to an addressable panel.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.