Ravel 24 V DC Power Supply, 2 A
A mains powered 24 V DC power supply rated up to 2 A, with a built in charger for a lead acid backup battery.
Ravel
Dealer for RavelRavel Addressable Back Box for Manual Pull Station
A back box with a built in addressable module that connects Ravel's single or dual action manual pull station to an addressable panel.
- Built in addressable module for single or dual action pull stations
- Addressed with an 8 way DIP switch
- LED blinks in normal condition and stays on when the pull station is operated
- 17 to 28 V DC, low standby current
- Size 81.50 W x 121.50 L x 54 D (mm)
Specifications
Specifications
| Specification | RE-717PMB |
|---|---|
| Operating Voltage | 17V - 28V DC |
| Alarm Current | 2.5 mA Max.(Latched) |
| Standby Current | 500 µA |
| Temperature Range | 0°C to 49°C / 32°C- 120°F |
| Storage Temperature | 0°C to 60°C |
| Humidity | 93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ±3° F |
| Dimensions | (81.50W x 121.50L x 54D) mm |
| Weight | 480 grams |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Power Supplies & Accessories
Ravel 24 V DC Power Supply, 5 A
A mains powered 24 V DC power supply rated up to 5 A, with a built in charger for a lead acid backup battery.
Ravel Response Indicator Plate, 2 Wire
An ivory metal indicator plate with a red LED that shows when a connected detector is in alarm. Ravel lists it for both its multi loop and conventional systems.
Ravel Thermal Printer with Interface Module
A small direct thermal printer with an interface module that connects to the Avani panel over a serial link to print system events and reports.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.