System Sensor S300PTU Programming and Test Tool (Series 300)
A menu driven hand-held tool for System Sensor Series 300 conventional detectors, giving access to detector functions and logs.
Dealer for System Sensor
System Sensor RTS151KEY Remote Test Station with Key
The key-operated version of the RTS151 remote test station, for testing duct smoke detectors from a convenient location.
- Supplied with a key
- Test switch and reset switch rated 10 VA at 32 VDC
- Alarm LED rated 2.8 to 32 VDC, 12 mA max, lights red for 2-wire detectors
- Alarm response time of 40 seconds max
- Accepts 14 to 18 AWG wire, temperature range -10 to 60°C
Specifications
Specifications
| Specification | RTS151KEY |
|---|---|
| Power Requirements | Power LED (Green): 14 to 35 VDC, | 12 mA max. | Alarm LED (Red): 2.8 to 32 VDC, | 12 mA max. | Total Current: 105 mA max. |
| Alarm Response Time | 40 seconds max. |
| Temperature Range | -10°C to 60°C (14°F to 140°F) |
| Relative Humidity | 95% non-condensing |
| Wire Gauge | 14 to 18 AWG |
| Dimensions | 4.6˝ H × 2.75˝ W × 1.8˝ D |
Specifications as published by System Sensor. Please confirm the exact model with us before ordering.
More System Sensor Accessories & Test Equipment
System Sensor M200E-SMB Surface Mounting Box for Addressable Modules
A surface mounting enclosure for System Sensor addressable input and output modules. The base is fixed to the wall, then the module and cover are screwed on with the two screws supplied.
System Sensor BEAMSMK Surface Mounting Kit for Reflected Beam Detectors
A kit for mounting reflected beam smoke detectors where surface wiring is used.
System Sensor BEAMMMK Multi-Mounting Kit for Reflected Beam Detectors
A bracket kit for mounting a reflected beam detector or a reflector on a wall or ceiling, with extra alignment range when the two cannot be mounted within 10° of each other.
System Sensor BEAMLRK Long-Range Kit for Reflected Beam Detectors
A kit that lets reflected beam detectors be installed at separations between 70 and 100 m by adding extra reflectors.
System Sensor RTS151 Remote Test Station for Duct Smoke Detectors
A remote test station for testing duct smoke detectors from a convenient location, with an alarm LED that lights red for 2-wire detectors.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.