Authorised distributor for SavemaxA fire rated access door for the wet riser shaft at each floor, giving maintenance access to the riser pipe and valves while keeping the shaft's fire compartment intact. It is made to standard fire shaft dimensions.
Standards and approvals: BIS/ISI Marked, CPWD Approved
| Specification | Details |
|---|---|
| Ideal For | Wet riser shafts in multi-storey buildings, hospitals, hotels, commercial towers |
| Certifications | BIS/ISI Marked | CPWD Approved |
Specifications as published by Savemax. Please confirm the exact model with us before ordering.
A single outlet landing valve in stainless steel, the standard choice for most wet riser systems. It is installed at each floor landing with a 63 mm outlet for connecting the fire hose.
A dual outlet stainless steel landing valve for floor landings where two hose lines may have to run at the same time. It is typically specified for high risk occupancies, large floor plates and basements.
The fitting on the end of a fire hose that controls the discharge pattern and flow of water, made in stainless steel. It fits standard 63 mm RRL hose couplings and gives a jet or spray for direct attack or cooling.
Sizes: 15m, 30m
Rubberised reinforced lined fire hose to IS 636, supplied with stainless steel instantaneous couplings already fitted so it can go straight into a hose box or cabinet. It comes in 15 m and 30 m lengths.
A swinging arm first aid hose reel, permanently connected to the building's water supply so one person can use it within seconds. The hose can be pulled out in any direction through 180°, reaching a wide area around the reel.
A first aid hose reel built to the BIS specification IS 884 for installation in buildings as per NBC requirements. Savemax notes that this type is mandatory in most government and CPWD specified projects.
Water inlet connections for fire brigade use, with inbuilt check valves, in 2 way, 3 way and 4 way versions. Offered in gunmetal or stainless steel, without a gate valve or with a 20 mm gate valve, and with Eco model options for the 2 way and 4 way inlets.
Replacement parts for Kartar hose couplings and breech inlets: a lug bush assembly and a rubber seal for hose couplings, and a rubber cap with chain for the breech inlet.
Breeching that joins two or more hose lines into one supply line, in gunmetal or aluminium alloy, with 2.5, 3 or 4 inch connections.
Breeching that divides one supply hose into several hose lines, in gunmetal or aluminium alloy, with 2.5, 3 or 4 inch connections.
Self contained watermist firefighting unit with its own pressure container and water storage, for sites with no ready supply of compressed air and water. Ceasefire states it works with 60 litres of water and makes droplets averaging under 50 microns.
Sizes: 2 Way, 3 Way, 4 Way
Fire brigade inlet connection with 63 mm male instantaneous inlets to IS:903, each with a built-in check valve, and a flanged outlet. Offered in 2-way, 3-way and 4-way versions.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
