Authorised distributor for MinimaxSingle headed oblique hydrant valve with an 80 mm flat faced flanged inlet and a 63 mm female instantaneous outlet, made to IS:5290-1993 Type A and ISI marked. It is flow tested at 900 LPM at 7 kg/cm2.
Standards and approvals: IS:5290 - 1993, ISI
| Specification | Details |
|---|---|
| TYPE | SINGLE HEADED OBLIQUE TYPE |
| INLET | "FLANGED -FLAT FACED (PCD: 160 mm, Holes: 4 no’s x 19mm Dia, flange: 200mm OD x 12 mm thk)" |
| OUTLET | OUTLET OF 63 MM FEMALE INSTANTENEOUS COUPLING WITH LUGS |
| DESIGN STD | IS:5290 - 1993 TYPE - A |
| OPERATION | BY HAND WHEEL |
| STEM | RISING |
| HYDRAULIC TEST PRESSURE | 21 KGF/SQ.CM FOR 150 secs |
| WATER TIGHTNESS | 14 KGF/SQ.CM FOR 150 secs |
| FLOW TEST | 900 LPM AT 7 Kg/cm2 |
| PAINTING | PO RED shade as per IS 538, of IS:5 |
| MOC | AVAILABLE IN GM / SS / AL MOC |
| APPROVAL | ISI MARKED |
Specifications as published by Minimax. Please confirm the exact model with us before ordering.
Double headed oblique hydrant valve with a 100 mm flat faced flanged inlet and 63 mm female instantaneous outlets, made to IS:5290-1993 Type B and ISI marked. It is flow tested at 1800 LPM at 7 kg/cm2.
Sizes: 2 Way, 3 Way, 4 Way
Fire brigade inlet connection with 63 mm male instantaneous inlets to IS:903, each with a built-in check valve, and a flanged outlet. Offered in 2-way, 3-way and 4-way versions.
Draw off connection for firefighting systems with a gunmetal body, a 100 mm inlet and an 80 mm flat faced flanged outlet. It is hydraulically tested at 21 kgf/sq.cm for 150 seconds.
Single outlet landing valve for hydrant mains and wet risers, made to IS 5290 Type A with the ISI mark and supplied with an ABS blank cap and chain. The heavy duty K-901 and the standard K901-E come in gunmetal or stainless steel.
Double outlet landing valve that feeds two hose lines from one hydrant point, with a 100 mm inlet. Made to IS 5290 Type B with the ISI mark, tested to 21 kg/cm2, in gunmetal or stainless steel.
Sizes: 80 mm
Bronze fire hydrant (landing) valve made to IS 5290 Type A, 80 mm with flanged ends and one outlet fitted with an instantaneous coupling for the hose.
Sizes: 80 mm
SS 304 stainless steel landing valve designed with reference to IS 5290 Type A, 80 mm with flanged ends and a single instantaneous outlet for the fire hose.
Sizes: 2 ½”
ISI marked gunmetal oblique landing valve made to IS 5290 and generally conforming to BS 5041 Part 1, with a 3 inch flanged inlet and a 2½ inch female instantaneous outlet.
Sizes: 2 ½”
ISI marked gunmetal double headed hydrant valve made to IS 5290, with a 4 inch flanged inlet and 2½ inch female instantaneous outlets.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
