Supplier for KaramA headband respirator for welding, torch cutting, soldering and brazing, with a flame retardant outer layer, an activated carbon pre-filter for organic vapours and an exhalation valve. Stated to EN 149:2001+A1:2009 and IS 9473:2002.
Standards and approvals: EN 149:2001+A1:2009, IS 9473:2002, CE, ISI
| Specification | CO2 Content of Inhalation Air | Particulate Filtering Efficiency | Breathing Resistance | Tota L Inward Leakage | Flammability | Bacteria L Filtering Efficiency |
|---|---|---|---|---|---|---|
| Vital Test | CO2 Content of Inhalation Air | Particulate Filtering Efficiency | Breathing Resistance | Total Inward Leakage | Flammability | Bacterial Filtering Efficiency |
| Requirement as per Standard | Carbon dioxide content of the inhalation air (dead space) should not exceed an average of 1% (by vol.) | Requirement as per standard- 94% | Inhalation Flow- 30 l/min: Should be less than 0.7 mbar Inhalation Flow- 95 l/min: Should be less than 2.4 mbar Exhalation Flow- 160 l/min: Should be less than 3.0 mbar | The arithmetic mean of the total inward leakage of at least 8 out of 10 subjects should not be greater than 8% The total inward leakage of all 50 subjects against the requirement of atleast 46 subjects should not be greater than 11% | The face respirator when subject to pass the flame once at the specified speed should not continue to burn after removal of flame | Bacterial filtering efficiency should be >90% |
| KARAM Respirator | < 0.6% | Exceeds 98% | 0.5 mbar 2.1 mbar 2.6 mbar | 5.0% 6.0% | KARAM Respirator does not continue to burn after removal of flame | > 98% |
Specifications as published by Karam. Please confirm the exact model with us before ordering.
Karam's FFP1S dust respirator in five fittings: ear loops (RF01) or headbands (RFH01), each with or without an exhalation valve, and a headband version with adjuster (RFH10). ISI marked to IS 9473:2002 under licence CM/L-8300137209.
The FFP2S step up from the FFP1S range, in the same five fittings: ear loops (RF02) or headbands (RFH02), each with or without a valve, and an adjustable headband version (RFH20). ISI marked to IS 9473:2002 under licence CM/L-8300137209.
An FFP1 respirator for solid and liquid particles with a cushioned nose pad and a headband adjuster, with or without an exhalation valve (RFH11 and RFH11+). Karam states it to EN 149:2001+A1:2009 and it is ISI marked to IS 9473:2002.
The FFP2 version of Karam's padded headband respirator, for solid and liquid particles, with or without an exhalation valve (RFH12 and RFH12+). Stated to EN 149:2001+A1:2009 and ISI marked to IS 9473:2002.
Karam's highest class in the padded headband series: an FFP3 respirator with exhalation valve, listed for welding, metal working and construction. Stated to EN 149:2001+A1:2009 and ISI marked to IS 9473:2002.
A three layer disposable surgical mask with ear loops (RFM50) or tie-back straps (RFM51) for medical, food processing and clean areas. ISI marked to IS 16289:2014, Class 3, under licence CM/L-8300142210.
A silicone full face mask with the patented ROTOR adjustment, which tightens with one hand even in gloves, a wide 210° polycarbonate screen and an inner half mask that reduces misting. It is stated to EN 136 Class 3 and takes EN 148-1 threaded M9000 cartridges, sold separately.
A silicone full face mask with silicone strap adjustment, a 210° polycarbonate screen, an inner half mask and a shoulder strap to carry it when not in use. Stated to EN 136 Class 3, it takes EN 148-1 threaded M9000 cartridges, sold separately.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
