Siemens FDOOT271 Cerberus PRO Neural Radio Fire Detector
A battery powered radio fire detector with dynamic signal analysis in the detector, which can be mounted anywhere within radio range of the gateway.
Dealer for SiemensSiemens FDCW241 Cerberus PRO Radio Gateway
The link between a Siemens FDnet or C-NET detector line and the radio detectors and call points, using two-way radio in two frequency bands.
- Bi-directional radio at 868 to 870 MHz and 433 to 435 MHz
- Powered via FDnet or C-NET plus a monitored 3.6 V lithium battery (ordered separately)
- Battery service life of not less than 6 years, as stated by Siemens
- Uses 2 addresses on the detector line
- IP40, IP65 with housing; 89 x 167 x 28 mm
- Siemens lists EN 54-17, EN 54-18, EN 54-25 and VdS
Standards and approvals: EN 54-17, EN 54-18, EN 54-25, VdS
Specifications
Specifications
| Specification | FDCW241 |
|---|---|
| Standard | EN 54-17 , EN 54-18 , EN 54-25 , EN 300220-2 |
| Radio frequency | 868...870 MHz (SRD band) and 433...435 MHz |
| Channel width | 50 kHz |
| Transmission distance | Max. 180 m in building Max. 1000 m in open air |
| Transmitting power | Typ. <10 (max. 25) mW ERP |
| Operating temperature | -10…55 °C |
| Supply voltage | Via FDnet or C-NET, additionally 3.6 V lithium battery, monitored |
| Transmitter/receiver antenna | Dual band antenna |
| Protection category | IP40; IP65 with housing |
| Relative humidity | ≤95 % rel. |
| Color | Pure white, ~RAL 9010 |
| Communication protocol | FDnet/C-NET |
| Dimensions (W x H x D) | 89 x 167 x 28 mm |
| Number of addresses | 2 |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Wireless Devices
Siemens FDOOTS271 Cerberus PRO Radio Fire Detector with Sounder
A wireless smoke detector with an integrated sounder that sounds on a fire alarm in an addressable system, with adjustable sound level and tones.
Siemens FDM273 Cerberus PRO Radio Manual Call Point, Indirect Actuation
A battery powered radio call point with indirect actuation (break the glass, then press the button) that can be mounted anywhere within radio range.
Siemens FDM275 Cerberus PRO Radio Manual Call Point, Type A
A type A radio call point: pressing the plastic insert raises the alarm directly, and a key resets it.
Wireless Fire Alarm Devices from other brands
Notifier
Notifier FWSG Wireless Gateway (WFDAS)
The bridge between a Notifier fire alarm control panel and its wireless fire devices, powered by the SLC loop and speaking FlashScan to the panel and a proprietary wireless protocol to the sensors.
Notifier
Notifier FWD-200P-IN and FWD-200PH-IN Wireless Photo and Photo-Thermal Detectors
Plug-in wireless smoke sensors with a photoelectronic chamber that send a digital smoke density reading through a wireless mesh to the gateway; the FWD-200PH-IN also sends a heat alarm.
Morley by Honeywell
Morley by Honeywell MI-GATE Wireless Gateway
The gateway of the Morley addressable wireless fire detection system. It is supplied from the 24V communication line and mounts on a B501AP base.
Morley by Honeywell
Morley by Honeywell Wireless RF Base, White (B501RF) or Red (B501RF-RR)
RF bases from the Morley Wireless range, offered in white or red.
System Sensor
System Sensor Agile 22051E-RF Wireless Optical Smoke Detector
A battery-powered wireless smoke detector from the Agile range, for sites where wiring is not wanted, with a tamper-resist lock on the sensor head.
System Sensor
System Sensor Agile 22051TLE-RF Wireless Multi-Criteria Photo-Thermal-IR Detector
A wireless multi-criteria detector that combines photoelectric, thermal and infrared sensing for more resistance to false alarms.