Siemens FDCW241 Cerberus PRO Radio Gateway
The link between a Siemens FDnet or C-NET detector line and the radio detectors and call points, using two-way radio in two frequency bands.
Dealer for SiemensSiemens FDM275 Cerberus PRO Radio Manual Call Point, Type A
A type A radio call point: pressing the plastic insert raises the alarm directly, and a key resets it.
- Direct alarm actuation by pressing the plastic insert
- Front part with radio electronics and dual-band antenna, plus back box for the battery
- Battery pack with AA 3.6 V lithium batteries, ordered separately
- Key reset restores the call point to operation
- IP24D, flame red, 1 address
- Siemens lists EN 54-11 (type A, indoor), EN 54-25 and VdS
Standards and approvals: EN 54-11, EN 54-25, VdS
Specifications
Specifications
| Specification | FDM275 |
|---|---|
| Standard | EN 54-11 (Typ A indoor) , EN 54-25 , EN 300220-2 |
| Radio frequency | 868...870 MHz (SRD band) and 433...435 MHz. |
| Channel width | 50 kHz |
| Transmission distance | In the buidling: max. 180 m In the open air: max. 1000 m |
| Transmitting power | Typ. 10 (max. ≤25) mW ERP |
| Operating temperature | -10…55 °C |
| Supply voltage | Battery pack with AA 3.6 V lithium batteries |
| Transmitter/receiver antenna | Dual band antenna |
| Protection category | IP24D |
| Relative humidity | ≤95 % rel. |
| Color | Flame red, ~RAL 3000 |
| Communication protocol | FDnet/C-NET |
| Dimensions (W x H x D) | 87 x 87 x 63 |
| Number of addresses | 1 |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Wireless Devices
Siemens FDOOT271 Cerberus PRO Neural Radio Fire Detector
A battery powered radio fire detector with dynamic signal analysis in the detector, which can be mounted anywhere within radio range of the gateway.
Siemens FDOOTS271 Cerberus PRO Radio Fire Detector with Sounder
A wireless smoke detector with an integrated sounder that sounds on a fire alarm in an addressable system, with adjustable sound level and tones.
Siemens FDM273 Cerberus PRO Radio Manual Call Point, Indirect Actuation
A battery powered radio call point with indirect actuation (break the glass, then press the button) that can be mounted anywhere within radio range.
Wireless Fire Alarm Devices from other brands
Notifier
Notifier FWSG Wireless Gateway (WFDAS)
The bridge between a Notifier fire alarm control panel and its wireless fire devices, powered by the SLC loop and speaking FlashScan to the panel and a proprietary wireless protocol to the sensors.
Notifier
Notifier FWD-200P-IN and FWD-200PH-IN Wireless Photo and Photo-Thermal Detectors
Plug-in wireless smoke sensors with a photoelectronic chamber that send a digital smoke density reading through a wireless mesh to the gateway; the FWD-200PH-IN also sends a heat alarm.
Morley by Honeywell
Morley by Honeywell MI-GATE Wireless Gateway
The gateway of the Morley addressable wireless fire detection system. It is supplied from the 24V communication line and mounts on a B501AP base.
Morley by Honeywell
Morley by Honeywell Wireless RF Base, White (B501RF) or Red (B501RF-RR)
RF bases from the Morley Wireless range, offered in white or red.
System Sensor
System Sensor Agile 22051E-RF Wireless Optical Smoke Detector
A battery-powered wireless smoke detector from the Agile range, for sites where wiring is not wanted, with a tamper-resist lock on the sensor head.
System Sensor
System Sensor Agile 22051TLE-RF Wireless Multi-Criteria Photo-Thermal-IR Detector
A wireless multi-criteria detector that combines photoelectric, thermal and infrared sensing for more resistance to false alarms.