Siemens FDF242-EX Cerberus PRO Addressable Flame Detector for Ex Zones 0, 1 and 2
The explosion-protected version of the FDF242 for FDnet-Ex and C-NET-Ex lines in explosive atmospheres of zones 0, 1 and 2.
Dealer for SiemensSiemens FDF242 Cerberus PRO Addressable Infrared Flame Detector
An addressable infrared flame detector with three pyroelectric sensors in a durable housing, for demanding industrial environments on FDnet or C-NET lines.
- Three pyroelectric sensors, each analysing a specific infrared wavelength
- Durable housing for challenging environments, IP66/IP67
- FDnet or C-NET, DC 12 to 33 V, 1 mA
- Operating temperature -40 to +70 °C; 120 x 122 x 83 mm
- Siemens lists EN 54-10, EN 54-17, AFNOR and VdS
Standards and approvals: EN 54-10, EN 54-17, AFNOR, VdS
Specifications
Specifications
| Specification | FDF242 |
|---|---|
| Standard | EN 54-10 , EN 54-17 |
| Operating voltage | DC 12…33 V |
| Protection category | IP66/IP67 |
| Operating current | 1 mA |
| Relative humidity | ≤96% rel. |
| Ambient temperature, operation | -40…70 °C |
| Operating temperature | -40°C…+70 °C |
| Cable capacity | 0,2...1,5 mm2 |
| Communication protocol | FDnet , C-NET |
| System compatibility | Sinteso / Cerberus |
| Dimensions (W x H x D) | 120 x 122 x 83 mm |
| Ext. alarm indicator | FDAI91 / FDAI92 / FDAI93 |
| Color | Signal white, RAL 9003, ~RAL 9003 |
| Terminals | 0,2...1,5 mm2 |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Flame & Specialist Detection
Siemens DF11Ex Cerberus PRO Conventional Infrared Flame Detector, Ex
A collective (conventional) infrared flame detector for explosion-hazard areas of zones 1 and 2, inside or outside.
Siemens OOH740-A9-EX Cerberus PRO Multi-Sensor Fire Detector for Ex Areas
A multi-sensor fire detector for potentially explosive areas, addressed individually on a C-NET-Ex line or used on a collective Ex line.
Siemens FDOOT241-A9-Ex Sinteso Multi-Sensor Fire Detector for Ex Areas
A Sinteso multi-sensor fire detector for potentially explosive areas, addressed individually on an FDnet-Ex line or used on a collective Ex line.
Siemens FDV202 FireCatcher Video Fire Detection Camera
A video fire detection camera for Siemens fire control panels that combines smoke and flame detection with immediate visual verification.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.