Siemens FDF242 Cerberus PRO Addressable Infrared Flame Detector
An addressable infrared flame detector with three pyroelectric sensors in a durable housing, for demanding industrial environments on FDnet or C-NET lines.

Dealer for SiemensA video fire detection camera for Siemens fire control panels that combines smoke and flame detection with immediate visual verification.
| Specification | FDV202 |
|---|---|
| Operating voltage | DC 12…29 V |
| Protection category | IP67 |
| Operating current | 520 mA |
| Relative humidity | 10 to 100% RH (condensing) |
| Storage temperature | -40 °C to 65 °C |
| Ambient temperature, operation | -40…60 °C |
| Operating temperature | -40 °C to 60 °C |
| Length | 400 |
| External supply input | 12 - 28 V DC |
| Dimensions (W x H x D) | 155 x 251 x 400 mm |
| Approval | CNPP BOSEC IEC/EN/UL 62368-1 IEC/EN/UL 60950-22 IS13252 |
| Color | White |
| Terminals | Screw terminals 0,25 - 1,5 mm^2 solid or flex |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
An addressable infrared flame detector with three pyroelectric sensors in a durable housing, for demanding industrial environments on FDnet or C-NET lines.
The explosion-protected version of the FDF242 for FDnet-Ex and C-NET-Ex lines in explosive atmospheres of zones 0, 1 and 2.
A collective (conventional) infrared flame detector for explosion-hazard areas of zones 1 and 2, inside or outside.
A multi-sensor fire detector for potentially explosive areas, addressed individually on a C-NET-Ex line or used on a collective Ex line.
A Sinteso multi-sensor fire detector for potentially explosive areas, addressed individually on an FDnet-Ex line or used on a collective Ex line.
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.