System Sensor B524HTR Analogue Heater Base
A two-wire heated base for System Sensor 200 analogue addressable detectors, used where frost or condensation could otherwise cause false alarms.
Dealer for System Sensor
System Sensor B501AP Addressable Detector Base
The standard base for System Sensor 500, 200, 200+ and 200 Advanced intelligent sensors, with a tamper-resistant option and a break-off address tag.
- Accepts all S200 addressable sensors
- Tamper-resistant feature enabled by breaking off a plastic tab
- Break-off address tag for labelling
- White as standard, ivory (IV) and black (BK) versions
- Width 102 mm, height 22.5 mm, weight 39 g
- Operating temperature -30 to +60°C, humidity 10 to 93%
Specifications
System Sensor has not published a specification table for this model. Ask us for the data sheet.
Specifications as published by System Sensor. Please confirm the exact model with us before ordering.
More System Sensor Detector Bases
System Sensor B524IEFT-1 Analogue Isolator Base
An isolator base for System Sensor 200 analogue addressable detectors that stops a short circuit from disabling the whole loop and restores the loop automatically once the fault is fixed.
System Sensor B401 Plug-in Detector Base
A plug-in base for System Sensor smoke and heat detector heads in 2-wire systems, with screw terminals for power and remote annunciator connections.
Detector Bases from other brands
Notifier
Notifier B501-WHITE Flangeless Detector Mounting Base, 4 inch
A 4 inch standard European flangeless mounting base for a plain detector position, UL/ULC listed.
Notifier
Notifier B200S-WHITE Intelligent Sounder Base
A sounder base that takes the same address as its detector but uses its own device type on the loop, and recognises the System Sensor synchronisation protocol.
Morley by Honeywell
Morley by Honeywell MI-B501AP Detector Base, Ivory (MI/B501AP/IV)
The plug-in base for Morley Advanced intelligent sensor ranges, in the ivory version. The standard MI-B501AP is white and the BK version is black.
Apollo
Apollo XPERT 8 Base (Soteria, Discovery and XP95)
A universal detector base that fits all Apollo detectors in the Soteria, Discovery and XP95 ranges. It supports isolated and non-isolated devices and has a wide interior for easy access to cables and terminals.
Apollo
Apollo Soteria Dimension Mounting Box
A white flame-retardant polycarbonate mounting box for flush fitting Soteria Dimension detectors into a ceiling opening. It is held in place by self-aligning fixing tabs.
Ceasefire
Ceasefire Intelli-Sense Detector Base (TI-002231)
Mounting base for all Intelli-Sense detectors, 110 mm across and 16 mm deep, with device locking and remote indicator connections.