Notifier B200S-WHITE Intelligent Sounder Base
A sounder base that takes the same address as its detector but uses its own device type on the loop, and recognises the System Sensor synchronisation protocol.
Dealer for NotifierNotifier B501-WHITE Flangeless Detector Mounting Base, 4 inch
A 4 inch standard European flangeless mounting base for a plain detector position, UL/ULC listed.
- 4 inch standard European flangeless design
- Operating range -20°C to 66°C
- 10% to 93% RH, non-condensing
- UL/ULC listed, FM approved and CSFM listed
Standards and approvals: UL/ULC Listed: S1115, FM Approved, CSFM: 7300-1653:0109, 7300-1653:0126, 7300-1653:0213, 7300-1653:0236
Specifications
Specifications
| Specification | Details | Details |
|---|---|---|
| B501-WHITE | 4" (10.16 cm) diameter. | |
| B300-6 | 6.1" (15.49 cm) diameter. | |
| B224BI, B224RB | 6.2" (15.748 cm) diameter. | |
| B200S, B200SR, B200SCOA | 6.875" (17.46 cm) diameter. | |
| Wire gauge | • B224BI, B224RB: 14 to 24 AWG. • B300-6, B210LP, B501, B200S, B200SR, B200SCOA: 12 to 24 | |
| Temperature range | • B224BI, B224RB, B200S, B200SR, B200SCOA: 32°F to 120°F (0°C to 49°C). • B300-6, B210LP, B501: -4°F to 150°F (-20°C to 66°C). | |
| Humidity range | 10% to 93% RH, non-condensing. | |
| System temperature and humidity ranges | This system meets NFPA requirements for operation at 0°C to 49°C (32°F to 120°F); and at a relative humidity (non-condensing) of 85% at 30°C (86°F) per NFPA, and 93% ± 2% at 32°C ± 2°C (89.6°F ± 1.1°F) per ULC. | |
| Operating voltage | 15 to 32 VDC | |
| Standby current | 170 µA maximum | |
| Operating voltage (2) | 15 to 32 VDC | |
| Standby current (2) | 150 µA maximum | |
| External supply voltage | 16 to 33 VDC (FWR) | |
| Standby current (3) | 500 µA maximum. | |
| SLC operating voltage | 15 to 32 VDC | |
| SLC standby current | See applicable sensor specification. | |
| Operating voltage (3) | 15 to 32 VDC (powered by SLC) | |
| Standby ratings | <450 µA maximum @ 24 VDC | |
| Set time (B224RB(A)(-IV)(-WH) only) | short delay 60-100 millisec- onds; long delay 6-10 seconds | |
| Reset time (B224RB(A)(-IV)(-WH) only) | 20 milliseconds maximum | |
| Relay characteristics (B224RB(A)(-IV)(-WH) only) | two-coil latch- ing relay; one Form-C contact; ratings (UL/CSA): 0.9 A @ 125 VAC, 0.9 A @ 110 VDC, and 3.0 A @ 30 VDC |
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Detector Bases
Notifier B200S-LF-WH Intelligent Sounder Base
A sounder base that uses its detector's address with its own device type, so the panel can switch on one sounder or a group of sounders.
Notifier B224BI-WH Isolator Detector Base
An intelligent isolator base for detectors, 6.2 inch in diameter, for loops that need short circuit isolation at the detector position.
Detector Bases from other brands
Morley by Honeywell
Morley by Honeywell MI-B501AP Detector Base, Ivory (MI/B501AP/IV)
The plug-in base for Morley Advanced intelligent sensor ranges, in the ivory version. The standard MI-B501AP is white and the BK version is black.
System Sensor
System Sensor B501AP Addressable Detector Base
The standard base for System Sensor 500, 200, 200+ and 200 Advanced intelligent sensors, with a tamper-resistant option and a break-off address tag.
System Sensor
System Sensor B524HTR Analogue Heater Base
A two-wire heated base for System Sensor 200 analogue addressable detectors, used where frost or condensation could otherwise cause false alarms.
Apollo
Apollo XPERT 8 Base (Soteria, Discovery and XP95)
A universal detector base that fits all Apollo detectors in the Soteria, Discovery and XP95 ranges. It supports isolated and non-isolated devices and has a wide interior for easy access to cables and terminals.
Apollo
Apollo Soteria Dimension Mounting Box
A white flame-retardant polycarbonate mounting box for flush fitting Soteria Dimension detectors into a ceiling opening. It is held in place by self-aligning fixing tabs.
Ceasefire
Ceasefire Intelli-Sense Detector Base (TI-002231)
Mounting base for all Intelli-Sense detectors, 110 mm across and 16 mm deep, with device locking and remote indicator connections.