Apollo Soteria Dimension Mounting Box
A white flame-retardant polycarbonate mounting box for flush fitting Soteria Dimension detectors into a ceiling opening. It is held in place by self-aligning fixing tabs.
Authorised distributor for ApolloApollo XPERT 8 Base (Soteria, Discovery and XP95)
A universal detector base that fits all Apollo detectors in the Soteria, Discovery and XP95 ranges. It supports isolated and non-isolated devices and has a wide interior for easy access to cables and terminals.
- Fits Soteria, Discovery and XP95 detectors
- E-Z Fit lets the base be mounted simply after wiring
- Supports isolated and non-isolated devices
- Isolated wiper keeps the loop connected while a device is removed for a short time
- Wide interior diameter for access to cables and terminals
- White polycarbonate, 10 year warranty
Specifications
Specifications
| Specification | SA5000-200APO |
|---|---|
| Warranty | 10 year |
| Colour | White |
| Finish | Gloss |
| Materials housing | Polycarbonate |
| Product depth | 20mm | 0.79in |
| Product diameter | 100mm | 3.94in |
| Terminal functions L2 | +L2, Loop in & out positive |
| Terminal functions L1 in | -L1 in, Loop (isolated) negative |
| Terminal functions L2 out | -L1 out, Loop (isolated) negative |
| Terminal functions +R | +R, Remote indicator positive connection |
| Terminal functions -R | -R, Remote indicator negative connection |
| Polarity | L1 &, L2 are polarity sensitive |
Specifications as published by Apollo. Please confirm the exact model with us before ordering.
More Apollo Detector Bases
Apollo XPERT 7 Base, White or Black
A low insertion force detector base with stainless steel contacts for quick installation, suited to the XP95 and Discovery detector ranges. It is available in white and in black.
Apollo XPERT 7 Isolating Base
An XPERT 7 base with a built-in isolator that senses short circuit faults on Discovery loops and spurs and keeps the disruption they cause to a minimum.
Apollo Isolator Base (for Isolator 55000-720)
A dedicated white polycarbonate base designed to accept only the Apollo Isolator 55000-720.
Apollo XPERT 7 I.S. Base (Intrinsically Safe)
An XPERT 7 base for intrinsically safe systems that accepts only I.S. products, so a standard detector cannot be fitted by mistake.
Apollo Series 65 Base
The standard base for Series 65 conventional detectors, designed so detectors fit without force, which helps on suspended ceilings. Detectors fit one way only and can be locked with a grub screw using a 1.5 mm hexagonal screwdriver.
Detector Bases from other brands
Notifier
Notifier B501-WHITE Flangeless Detector Mounting Base, 4 inch
A 4 inch standard European flangeless mounting base for a plain detector position, UL/ULC listed.
Notifier
Notifier B200S-WHITE Intelligent Sounder Base
A sounder base that takes the same address as its detector but uses its own device type on the loop, and recognises the System Sensor synchronisation protocol.
Morley by Honeywell
Morley by Honeywell MI-B501AP Detector Base, Ivory (MI/B501AP/IV)
The plug-in base for Morley Advanced intelligent sensor ranges, in the ivory version. The standard MI-B501AP is white and the BK version is black.
System Sensor
System Sensor B501AP Addressable Detector Base
The standard base for System Sensor 500, 200, 200+ and 200 Advanced intelligent sensors, with a tamper-resistant option and a break-off address tag.
System Sensor
System Sensor B524HTR Analogue Heater Base
A two-wire heated base for System Sensor 200 analogue addressable detectors, used where frost or condensation could otherwise cause false alarms.
Ceasefire
Ceasefire Intelli-Sense Detector Base (TI-002231)
Mounting base for all Intelli-Sense detectors, 110 mm across and 16 mm deep, with device locking and remote indicator connections.