Notifier AMPS-24/E Addressable Power Supply and Battery Charger
An addressable power supply and battery charger with up to three 24 VDC outputs, for the NFS-3030 and NFS2-3030 panels, that can also be the primary supply for the NCA-2 annunciator.
Dealer for NotifierNotifier INSPIRE PMB AUX Series Addressable Power Supply
An addressable power supply for INSPIRE N16 panels with four power-limited NAC outputs, two 24 VDC auxiliary outputs and a remote sync input.
- Addressable on the CLP bus
- Four power-limited NAC outputs, Class A or Class B wiring
- 6 amps in standby, 8.5 amps in alarm; two 24 VDC auxiliary outputs
- Charges 7 AH to 100 AH batteries, up to 210AH with PMBNL-PCB Rev B or higher
- UL listed for agent and water releasing with FCM-1-REL
- UL listed, FM approved, CSFM, FDNY and OSHPD; UL 864 and NFPA 72
Standards and approvals: UL Listed: S635, FM Approved: FM23FPUS0095, CSFM: 7165-0028:0516, FDNY: COA#001761, Certified for Seismic applications in accordance with IBC, OSHPD Approved: OSP-0072, UL 864, 10th edition, NFPA 72 National Fire Protection Association
Specifications
Specifications
| Specification | Details |
|---|---|
| AC power | 2.5A, 120VAC, 50/60 HZ; 1.25A, 240VAC, 50/60 Hz • 24VDC aux outputs: Aux Power 1 to 24VDC, Class A/B, Power-limited (Class 2), NAC 1.5 A Special Applications, Releasing 2.0 A Special Applications, Resettable/Non-Resettable Aux Power 2 to 24VDC, Class B, Power-limited (Class 2), NAC 1.5 A Special Applications, Releasing 2.0 A Special Applications, Resettable/Non-Resettable |
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Power Supplies & Panel Modules
Notifier ACPS-610(E) Addressable Charger Power Supply
An auxiliary power supply with a battery charging option, giving 6 amps of shared power to four outputs while charging batteries, or 10 amps with an external charger.
Notifier LCM-320 Loop Control Module
A plug-in loop control module that adds signalling line circuits to ONYX NFS2-640 and NFS2-3030 fire alarm control panels.
Notifier LEM-320 Loop Expander Module
A loop expander module listed together with the LCM-320, with FDNY certificates for use with the NFS2-640 and NFS2-3030 panels.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.
System Sensor
System Sensor S300PTU Programming and Test Tool (Series 300)
A menu driven hand-held tool for System Sensor Series 300 conventional detectors, giving access to detector functions and logs.
System Sensor
System Sensor M200E-SMB Surface Mounting Box for Addressable Modules
A surface mounting enclosure for System Sensor addressable input and output modules. The base is fixed to the wall, then the module and cover are screwed on with the two screws supplied.