ISO 9001:2015 Certified · MSME Registered · Military Engineering Services Registered
Fire Protection System logoFIRE PROTECTION SYSTEMTMFire safety contractors, dealers & distributors · Bhopal, M.P.
EXCELLENCE IN FIRE EXTINGUISHER, FIRE HYDRANT, FIRE ALARM & FIRE SUPPRESSION SYSTEMS

Fire Safety Signage, Emergency Lights and Gear in Bhopal

Exit signs, photoluminescent marking and emergency lights show the way out when the lights fail or smoke fills a corridor, and escape gear such as smoke hoods and fire blankets helps people get past smoke and flames. FPS offers signage, emergency lighting and safety gear from Ceasefire, Ravel and Balaji Fire Safety in Bhopal and across Madhya Pradesh.

Ceasefire

Ceasefire SEE Photoluminescent Exit Signs and Marking Strips

Photoluminescent2 mm wall signs0.3 mm floor strips

Photoluminescent signs and marking strips that glow through smoke and darkness to show the route to the nearest exit and to emergency equipment. Wall signs are 2 mm rigid plastic and floor or stair strips are 0.3 mm self adhesive, non slip polycarbonate.

View specifications ›
Ceasefire

Ceasefire Fire Suits

Fire suitSafety gearCeasefire

Fire suits listed in Ceasefire's safety gear range. The maker's page gives no specifications, so FPS confirms the available options against your requirement before quoting.

View specifications ›

How to choose

First decide between signs that glow and signs that are lit. Photoluminescent and glow signs need no wiring: they absorb surrounding light and glow when the lights go out. Ceasefire SEE wall signs are 2 mm rigid plastic, and SEE floor and stair strips are 0.3 mm self adhesive, non slip polycarbonate that stays visible when smoke hides signs higher up. The Ceasefire Excellence series puts a 2 mm photoluminescent cover in an aluminium frame, with acrylic glass and brushed stainless steel variants, for lobbies and other front of house areas. Ceasefire lists charging from surrounding light of only 25 lux and a glowing time of 3100 minutes, with a luminance of 215 mcd/sq m for the Excellence series. Balaji Fire Safety offers a wall mounted Assembly Point sign in foam board with a radium glow finish, to mark where people gather after evacuation.

LED exit signs and emergency lights run on mains power and switch to a battery when it fails. Ravel LumiCzar exit signs use a 2 W LED with Ni-MH battery backup of at least 90 minutes, in a sheet metal housing (LZR-XSM01, viewing distance of at least 20 m) or an aluminium housing with universal mounting (LZR-XSM02, at least 22 m). The LumiCzar Bluetooth exit sign gives at least 3 hours of backup and reports its health to an Android app, and the LumiCzar Basic emergency light gives 270 lumens from 4 W with at least 1.5 hours of backup. For larger buildings, the Ravel Eliprobe Archon controller links emergency luminaires on an RS485 Modbus RTU network for central health checks, remote on, off and dimming, and up to 1 year of stored test reports. Ravel lists IEC/EN 60598-2-22 among the standards for its LumiCzar range.

For people, the Ceasefire Fire Escape Gear Box is a mild steel box holding two fire escape masks and two fire blankets. The smoke hood is tested to EN 403:1993, gives breathable air for 15 minutes and is single use, and the blankets measure 1.2 m x 1.8 m. Keep a box near the exits of hotels, hostels, hospitals and upper office floors. Ceasefire also lists fire suits in its safety gear range but publishes no specifications, so FPS confirms the options against your requirement before quoting.

Frequently asked questions

How do photoluminescent exit signs work without power?
They absorb surrounding light and glow when the lights go out, so no wiring or battery is needed. Ceasefire SEE signs charge from surrounding light of only 25 lux, and Ceasefire lists a light decay period of 3100 minutes. Ceasefire also states they are non radioactive, non toxic, lead free and free of phosphorus.
Should I choose a glow sign or an LED exit sign?
A glow or photoluminescent sign needs no power and suits escape routes, floors and stairs where wiring is difficult. An LED exit sign such as the Ravel LumiCzar runs on mains power and switches to its battery in a power cut, with at least 90 minutes of backup on the LZR-XSM01 and LZR-XSM02 and at least 3 hours on the Bluetooth model.
How can I check that emergency signs and lights are working?
Ravel LumiCzar signs have an LED that shows mains or battery operation, and the Bluetooth model reports its live health to an Android app. Across a whole building, the Ravel Eliprobe Archon controller runs health checks of the power supply, battery, charger and LED lamps of networked luminaires.
What is inside the Fire Escape Gear Box?
Two fire escape masks (smoke hoods) and two fire blankets in a mild steel box. The hood filters smoke to give breathable air for 15 minutes, and the blankets measure 1.2 m x 1.8 m.
Can a smoke hood or fire blanket be used again?
The Ceasefire smoke hood is single use and must be replaced after use. A fire blanket can be slipped on to escape, wrapped around burning clothing or used to smother a fire in a vessel.
How do I get a price?
Prices are shared on request. Call or WhatsApp +91 92440 89060 with your sign list, emergency light count or gear quantities, and FPS will supply and install them in Bhopal and across Madhya Pradesh.

Need a Fire NOC or renewal in Madhya Pradesh?

We handle your complete Fire NOC application and renewal: documentation, liaison with the MP Fire Department and compliance support.

Talk to our NOC team
Call +91 92440 89060Send a text messageEmail usWhatsApp us