Notifier 302-AW-194 Thermotech Rate-Anticipation Heat Detector, 194°F
The 194°F version of the hermetically sealed 302-AW rate-anticipation heat detector, operating within two to three degrees of its set point.
Dealer for NotifierNotifier 302-AW-135 Thermotech Rate-Anticipation Heat Detector, 135°F
A hermetically sealed rate-anticipation heat detector with a 135°F set point, operating within two to three degrees of it regardless of the rate of rise.
- 135°F set point, rate-anticipation operation
- Normally-open, self-restoring
- Hermetically sealed: shock resistant, corrosion resistant and tamper-proof
- Universal application for any type of occupancy
- UL listed and FM approved, CSFM listed
Standards and approvals: UL Listed: S539 (302-AW-135/-194; 302-ET-135/-194; 302-135-194), FM Approved: (302-AW-135/-194; 302-ET-135/-194; 302-135/-194), CSFM: 7270-0021:001
Specifications
Notifier has not published a specification table for this model. Ask us for the data sheet.
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Conventional Detectors
Notifier 302-ET-135 Thermotech Rate-Anticipation Heat Detector, 135°F
A hermetically sealed 302-ET rate-anticipation heat detector with a 135°F set point, operating within two to three degrees of it regardless of the rate of rise.
Notifier 302-ET-194 Thermotech Rate-Anticipation Heat Detector, 194°F
The 194°F version of the hermetically sealed 302-ET rate-anticipation heat detector, operating within two to three degrees of its set point.
Notifier 302-EPM-135 Explosion-Proof Thermotech Heat Detector, 135°F
An explosion-proof rate-anticipation heat detector with a 135°F set point, for installation in hazardous locations.
Notifier 302-EPM-194 Explosion-Proof Thermotech Heat Detector, 194°F
The 194°F version of the explosion-proof 302-EPM rate-anticipation heat detector, for installation in hazardous locations.
Smoke and Heat Detectors from other brands
Honeywell
Honeywell FDC-101 Wi-Fi Smoke Detector (IMPACT by Honeywell)
A battery operated, Wi-Fi enabled photoelectric smoke detector from the IMPACT by Honeywell range. When smoke reaches its alarm threshold it sounds a buzzer, flashes an LED and sends real-time alerts to a smartphone through the IMPACT by Honeywell app.
Honeywell
Honeywell SSD-100 Standalone Smoke Detector (IMPACT by Honeywell)
A battery operated standalone smoke alarm with photoelectric sensing that sounds an alarm and lights a red LED when smoke reaches its threshold. It runs on two AA batteries and also warns of a low battery or a chamber fault.
Morley by Honeywell
Morley by Honeywell HM/PSE/S2 Photoelectric Smoke Detector (DXc and ZXSe)
An S200A plug-in photoelectric smoke detector listed with the DXc and ZXSe panels. Its detection chamber is designed to cut false alarms from dust, insects and other debris.
Morley by Honeywell
Morley by Honeywell HM/PTSE Photo-Thermal Multi-Criteria Detector (DXc and ZXSe)
An S200A multi-criteria detector that adds 58°C fixed temperature and rate of rise thermal sensing to a photoelectric smoke sensor, for better false alarm immunity and faster response to a wide range of fires.
System Sensor
System Sensor 22051E / 22051EI Addressable Photoelectric Smoke Detector (Series 200 Advanced)
A white addressable photoelectric smoke detector working on the light scattering principle, with smoothing filters and embedded software to resist unwanted alarms. The 22051EI version has a built-in isolator.
System Sensor
System Sensor 22051TE / 22051TEI Addressable Photo-Thermal Detector (Series 200 Advanced)
A two sensor detector that adds thermal sensing to the photoelectric smoke chamber for better false alarm immunity and a faster response to a wide range of fires. The 22051TEI version has a built-in isolator.