Honeywell Intevio HAM-2000 Power Amplifier, 500 W
A 500 W Class-D power amplifier that provides 70 V or 100 V audio amplification for the Intevio PAVA system, with dual channel audio capability.

A 4 x 500 W power and booster amplifier that amplifies the audio signal for public address and voice alarm systems, in a light, high efficiency design.
Standards and approvals: CE, RoHS, EN 60065, EN 62368, EN 55032, EN 61000-3, EN 55103-2, FCC
| Specification | HN-4500-E |
|---|---|
| MODEL NUMBER | HN-IA4500-E |
| Number of Input Channels (Analog) | 4 |
| Number of Output Channels | 4 |
| Input Connectors (Signal Input) | 4 x XLR, 4 x 3-pin Phoenix, 4 x RCA (Phono) |
| Output Connectors (Speaker Output) | 4 x 2-pin Phoenix |
| Output Gain Knob (Volume Knob) at the rear panel | 4 |
| Model Selector - Normal or Bridged (Rear Panel) | Press for Bridge Mode and Release for Normal Mode |
| Front Panel LED Indications | Power, Signal, Protect, Clip |
| Maximum Output Power @ 40 | 4 x 500W |
| Maximum Output Power @ 80 | 4 x 500W |
| Maximum Output Power @ 70V/100V (Direct Drive) | 4 x 500W |
| Maximum Output Power @ 40 Bridged (Channel Pair) | 2 x 1000W |
| Maximum Output Power @ 80 Bridged (Channel Pair) | 2 x 1000W |
| Maximum Output Power @ 70V/100V Bridged (Channel Pair) | 2 x 1000W |
| Output Circuitry | Class D - full bandwith PWM modulator with ultra low distortion, 90% efficiency. |
| Input Sensitivity | 1.4V (+4 dBu) |
| Amplifier Gain | 28.2 dB / 34.2 dB bridge mode |
| Signal To Noise-Ratio | > 119 dB (A-weighted, 20 Hz - 20 kHz, 80 load) |
| THD+N (typical) | < 0.05 % (20 Hz - 20 kHz, 80 load, 3 dB below rated power) |
| Frequency Response | 20 Hz - 20 kHz (+0/-0.25 dB (80 load, 3 dB below rated power) |
| Damping Factor | >2000, each channel (80 load, 1 kHz and below) |
| Protection Circuits | Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection |
| Power Supply | Universal mains switch mode power supply with Power Factor Correction (PFC) & integral standby converter |
| Input Voltage (AC) | Universal Mains with PFC, 90-270 VAC @ 50Hz to 60Hz |
| Operating Temperature & Humidity | -10°C to 50°C @ 90% relative humidity (non condensing) |
| Cooling | Fan, variable speed, temperature controlled, front to rear airflow |
| CE & RoHS Standards | Complaint to CE & RoHS |
| Safety Standards | Complaint to IEC/EN 60065:2001 (7th E) + A1:2005 = A2:2010 | Complaint to IEC/EN/UL 62368-1: 2014 (2nd E) | Complaint to EN 60065.2002 + A12006 + A11: 2008 + A2:2010 + A12:2011 | Complaint to EN 62368:2014 | Complaint to CSA C22.2 NO.62368-1-14:2014 | Complaint to UL 62368:2014 Complaint to EN 55032:2012 with EN 55032:2012 AC 2013 |
| Electro Magnetic Compliance (Emission) | Complaint to EN 61000-3-2:2014 | Complaint to EN 61000-3-3:2013 |
| Electro Magnetic Compliance (Immunity) | Complaint to EN 55103-2:2009 | Complaint to FCC part 15 sub part B |
| AC Input Power Cord | 230V/10A - 3 Pin Power Cord (Fixed) |
| Input AC Power in watts, when both channels are driven (In Bridge Mode), Pink Noise input @ 230V AC input | 984W |
| Net Weight | 10.00 Kg |
| Gross Weight | 11.50 Kg |
| Product Dimension | 530 mm x 482 mm x 88 mm (L x W x H) |
Specifications as published by Honeywell. Please confirm the exact model with us before ordering.
A 500 W Class-D power amplifier that provides 70 V or 100 V audio amplification for the Intevio PAVA system, with dual channel audio capability.
A four channel Class-D amplifier for the X-618 system with fully digital audio transmission, which keeps the signal free from interference and easy to control. It takes a 24 V DC backup supply.
A single channel 500 W Class-D amplifier for the X-618 system with fully digital audio transmission, which keeps the signal free from interference and easy to control. It takes a 24 V DC backup supply.
A two channel Class-D amplifier for the X-618 system with fully digital audio transmission, which keeps the signal free from interference and easy to control. It takes a 24 V DC backup supply.
Amplifies the audio for high power loudspeakers on the X-618 PAVA system, with balanced and unbalanced inputs and automatic detection of power supply errors.
A four channel amplifier for the X-618 digital PAVA system, with a built-in fuse for over-current protection and a cooling fan to keep it running efficiently.
The heart of the Notifier audio command centre, giving voice evacuation for emergency communications and mass notification, with 8 simultaneous messages and networking across a campus or large facility.
A distribution board that adds digital bulk audio evacuation to the DVC system, converting digital audio to analogue and routing it to amplifiers and optional backups.
Microprocessor based fire alarm panel with a built-in PA system, a 100 V RMS output and up to 11 minutes of digital voice recording. Alert and evacuation announcements are sent through a PA zone selector with All Call.
Sizes: 2,4,8,16,32,64 Zone
Microprocessor based master station for fire fighter telephone systems, available in 2 to 64 zones and working on a DTMF, PSTN based, 2 wire, 24 V telephone circuit. Soft-Chip states it is compatible with all conventional and addressable fire fighter telephone systems.
The control panel of the FYRLAAST fire fighter telephone system. Specifications are confirmed on enquiry.
An addressable extension telephone for the FYRLAAST fire fighter telephone system. Specifications are confirmed on enquiry.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.