Honeywell Intevio HAM-2000 Power Amplifier, 500 W
A 500 W Class-D power amplifier that provides 70 V or 100 V audio amplification for the Intevio PAVA system, with dual channel audio capability.

A four channel 100 V power amplifier for the Variodyn D1 PAVA system, with its outputs connected to the Variodyn D1 DOM module by the output cable.
Standards and approvals: EN 54-16
| Specification | 4XD500 |
|---|---|
| Nominal output power (sin.) | 4 x 500 W |
| Rel. humidity | 40 % to 93 %, (w/o condensation) |
| Dimensions (W x H x D) | 483 x 88 x 454 mm / 2 HU, 19 |
| Net Weight | ca. 14 kg |
| Input impedance | > 20 kΩ, el. symmetrical |
| Housing colour | gray similar RAL 7016 |
| Power consumption (230 V AC) | 15.0 A |
| Power consumption (24 V DC / Voice announcement / 1/3 load) | 40.1 A |
| Power consumption (24 V DC / Voice announcement / 1/8 load) | 17.6 A |
| Channel separation | > 92 dB |
| Power consumption in stand-by mode (230 V AC) | 0.5 A |
| Rated voltage | 230 V AC |
| Rated frequency | 50 to 60 Hz, +10% / -5% |
| Operating principle | Class D |
| Transmission frequency band (-1 dB) | 20 Hz to 20 kHz |
| Distortion factor at max. load / 1kHz | < 0.03 % |
| Ambient temperature during operation | -5 °C to +55 °C |
| Transmission frequency band | 20 Hz to 20 kHz |
| Power amplifier 4 x 500 W / 100 V | 580249 |
| Backup cable RC 44 | 583444 |
| Input cable DOM amplifier (2 x required) | 583491 |
| Output cable 4XV amplifier DOM | 583477.21 |
Specifications as published by Honeywell. Please confirm the exact model with us before ordering.
A 500 W Class-D power amplifier that provides 70 V or 100 V audio amplification for the Intevio PAVA system, with dual channel audio capability.
A four channel Class-D amplifier for the X-618 system with fully digital audio transmission, which keeps the signal free from interference and easy to control. It takes a 24 V DC backup supply.
A single channel 500 W Class-D amplifier for the X-618 system with fully digital audio transmission, which keeps the signal free from interference and easy to control. It takes a 24 V DC backup supply.
A two channel Class-D amplifier for the X-618 system with fully digital audio transmission, which keeps the signal free from interference and easy to control. It takes a 24 V DC backup supply.
Amplifies the audio for high power loudspeakers on the X-618 PAVA system, with balanced and unbalanced inputs and automatic detection of power supply errors.
A four channel amplifier for the X-618 digital PAVA system, with a built-in fuse for over-current protection and a cooling fan to keep it running efficiently.
The heart of the Notifier audio command centre, giving voice evacuation for emergency communications and mass notification, with 8 simultaneous messages and networking across a campus or large facility.
A distribution board that adds digital bulk audio evacuation to the DVC system, converting digital audio to analogue and routing it to amplifiers and optional backups.
Microprocessor based fire alarm panel with a built-in PA system, a 100 V RMS output and up to 11 minutes of digital voice recording. Alert and evacuation announcements are sent through a PA zone selector with All Call.
Sizes: 2,4,8,16,32,64 Zone
Microprocessor based master station for fire fighter telephone systems, available in 2 to 64 zones and working on a DTMF, PSTN based, 2 wire, 24 V telephone circuit. Soft-Chip states it is compatible with all conventional and addressable fire fighter telephone systems.
The control panel of the FYRLAAST fire fighter telephone system. Specifications are confirmed on enquiry.
An addressable extension telephone for the FYRLAAST fire fighter telephone system. Specifications are confirmed on enquiry.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.