Authorised distributor for ApolloA standalone conventional beam detector designed around easy installation: it aligns itself, needs no specialist tools or knowledge, and one person can fit it.
| Specification | SC7000-101APO |
|---|---|
| Operating temperature | -20°C to 55°C |
| Storage temperature | -40°C to 85°C |
| Humidity (no condensing or icing) | 0% to 93%, RH |
| IP Rating | IP55 |
| Supply voltage | 14, V -36, V dc |
| Weight | 0.7 kg |
| Colour | white |
Specifications as published by Apollo. Please confirm the exact model with us before ordering.
An addressable reflective beam smoke detector for large open areas and high ceilings, with a low level controller that can run two auto-aligning detector heads. Each head can be configured from 8 m to 100 m.
An additional auto-aligning detector head for the Apollo auto-aligning reflective beam detector, so one low level controller can run a second head. Part of the XP95 range.
A conventional reflective beam detector made up of a ground level controller, an auto-aligning detector head with an integral laser for quick first alignment, and a single prism. A second detector head can be added to the same controller.
A conventional beam detector covering 5 to 120 metres, for large open spaces with high ceilings and for sites where ceiling mounted smoke detectors would be hard to reach. Its styling is meant to suit modern buildings and heritage sites.
A modular reflective beam detection system for conventional panels that can be specified to suit a range of demanding applications.
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
