Apollo Reflective Beam Detector Add-on Head, Auto-Aligning
An additional auto-aligning detector head for the Apollo auto-aligning reflective beam detector, so one low level controller can run a second head. Part of the XP95 range.
Authorised distributor for ApolloApollo Intelligent Reflective Beam Detector, Auto-Aligning
An addressable reflective beam smoke detector for large open areas and high ceilings, with a low level controller that can run two auto-aligning detector heads. Each head can be configured from 8 m to 100 m.
- Works on XP95, Discovery and CoreProtocol loops
- Two detector heads per low level controller
- Compensates for building movement and contamination
- Selectable alarm and pre-alarm thresholds
- Standards EN 54-12 and EN 54-17, with CPR and VdS approvals
- 17 to 35 V dc supply, -10 to 55°C, designed to IP54
Standards and approvals: EN 54-12, EN 54-17, CPR, VdS
Specifications
Specifications
| Specification | SA7100-100APO |
|---|---|
| Warranty | 10 year |
| Applications | Churches, Warehouses |
| Operating distance (max) | 100m |
| Operating distance (min) | 8m |
| Operating distance | 8 to 100m |
| Optical wave length | 850nm |
| Colour | Grey |
| Materials housing | Polycarbonate |
| Controller with base: height | 230mm |
| Controller with base: weight | 1000g |
| Controller with base: width | 202mm |
| Detector with base: height | 131mm |
| Detector with base: weight | 537g |
| Detector with base: width | 134mm |
| Universal bracket: width | 202mm |
| Universal bracket: height | 230mm |
| Reflector: height | 100mm |
| Reflector: width | 100mm |
| Reflector: weight | 100g |
| Supply voltage (max) | 35V dc |
| Supply voltage (min) | 17V dc |
| Supply voltage (Vmin-Vmax) | 17 to 35V dc |
| Humidity (max) | 93%, RH |
| Humidity (min) | 0%, RH |
| Humidity Note | no condensation or icing |
| Humidity | 0% to 93% (no condensation or icing) |
| Operating temperature | -10 to 55°C | 14 to 131°F |
| Operating temperature (max) | 55°C | 131°F |
| Operating temperature (min) | -10°C | 14°F |
| IP rating | Designed to |
| IP rating Value | IP54 |
| Storage temperature (max) | 85°C |
| Storage temperature (min) | -40°C |
| Storage temperature | -40 to 85°C |
Specifications as published by Apollo. Please confirm the exact model with us before ordering.
More Apollo Beam Detectors
Apollo Conventional Reflective Beam Detector, Auto-Aligning
A conventional reflective beam detector made up of a ground level controller, an auto-aligning detector head with an integral laser for quick first alignment, and a single prism. A second detector head can be added to the same controller.
Apollo Conventional End to End Beam Detector
A conventional beam detector covering 5 to 120 metres, for large open spaces with high ceilings and for sites where ceiling mounted smoke detectors would be hard to reach. Its styling is meant to suit modern buildings and heritage sites.
Apollo Fireray One Conventional Beam Detector (Series 65)
A standalone conventional beam detector designed around easy installation: it aligns itself, needs no specialist tools or knowledge, and one person can fit it.
Apollo Fireray Hub Reflective Conventional Beam Detector System
A modular reflective beam detection system for conventional panels that can be specified to suit a range of demanding applications.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.