Ravel Carbon Monoxide (CO) Gas Detector with Relay Output
A conventional 4 wire detector for carbon monoxide that runs on 24 V DC and signals the panel through a normally open alarm relay.
Ravel
Dealer for RavelRavel Mains Powered LPG (Propane) Detector with Relay Output
A mains powered LPG detector with a semiconductor gas sensor, for use with addressable or conventional fire detection panels.
- Powered from 110 V or 220 V AC mains, 50/60 Hz
- Semiconductor gas sensor, alarm at 0.10 LEL (plus or minus 0.03)
- 85 dB internal sounder at 3 m
- Normally open or normally closed relay models
- Hush and test button, with power, alarm and service indicators
- No programming needed
Specifications
Specifications
| Specification | RE-396LP |
|---|---|
| Operating Voltage | 110V / 220VAC, 50/60 Hz |
| Power consumption | 4W |
| Sensing Cell | Semiconductor |
| Alarm Response Threshold | (0.10 ±0.03) LEL |
| Sounder Output | ≥ 85 dB @ 3 m |
| Alarm relay | SPST. N/O or N/C. 1.0 A @ 30 V DC / 0.5 A @ 125 V AC |
| Power available indicator | Green |
| Alarm visual indicator | Red |
| Service required visual indicator | Yellow |
| Operating temperature | 0°C - +40°C |
| Operating humidity | 0 % - 95 % RH, non-condensing |
| Dimensions (H × W ×D) | (80 × 156 × 51) mm |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Gas Detectors
Ravel Natural Gas (Methane) Detector with Relay Output
A conventional 4 wire detector for natural gas (methane) that alarms at or below 0.25 LEL and signals the panel through a normally open alarm relay.
Ravel LPG (Propane) Gas Leak Detector with Relay Output
A conventional 4 wire detector for LPG (propane) that alarms at or below 0.25 LEL and signals the panel through a normally open alarm relay.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.