Ravel Carbon Monoxide (CO) Gas Detector with Relay Output
A conventional 4 wire detector for carbon monoxide that runs on 24 V DC and signals the panel through a normally open alarm relay.
Dealer for RavelRavel Natural Gas (Methane) Detector with Relay Output
A conventional 4 wire detector for natural gas (methane) that alarms at or below 0.25 LEL and signals the panel through a normally open alarm relay.
- Senses natural gas (methane, CH4)
- Alarm threshold at or below 0.25 LEL
- 4 wire operation on 21 to 27 V DC
- Normally open (N/O) alarm relay output and 70 dB internal sounder
- Auto reset and internal reed switch for hush and test
- Fits the RE-314B 4 wire detector base
Specifications
Specifications
| Specification | RE-386NG |
|---|---|
| Operating Voltage | (21 ~ 27)VDC |
| Start-up current | ≤120mA |
| Start-up time | ≤10min |
| Quiescent Current | 45 mA |
| Alarm Current (max) | 60 mA |
| Sampling Time | 3 s ~ 5 s |
| Reset Voltage | ≤1 V |
| Reset Time | ≤5 s |
| Alarm response threshold | ≤ 0.25 LELCH4 |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Gas Detectors
Ravel LPG (Propane) Gas Leak Detector with Relay Output
A conventional 4 wire detector for LPG (propane) that alarms at or below 0.25 LEL and signals the panel through a normally open alarm relay.
Ravel Mains Powered LPG (Propane) Detector with Relay Output
A mains powered LPG detector with a semiconductor gas sensor, for use with addressable or conventional fire detection panels.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.