System Sensor 6500E Addressable Reflected Beam Smoke Detector
An addressable reflector-type linear optical beam detector that connects directly to an analogue loop, for buildings with large open spaces.
Dealer for System Sensor
System Sensor 6500RE Conventional Reflected Beam Smoke Detector
A conventional reflector-type beam smoke detector that connects directly to a conventional detector circuit, for large open spaces.
- Range 10 to 100 m
- 4 fixed sensitivity levels and 2 automatic variable sensitivity modes
- Numerical indicators and plus or minus 10° beam alignment
- 10.2 to 32VDC (12 or 24VDC nominal), 17mA maximum standby
- IP54, -30 to +55°C, weight 1.77kg
- EN 54-12 and CPR
Standards and approvals: EN54 to 12:2015, CPR
Specifications
Specifications
| Specification | 6500RE |
|---|---|
| Operating Voltage Range | 10.2 to 32VDC (12 or 24VDC nominal)* |
| Maximum Standby Current | 17mA |
| Maximum Alarm Current (LED on) | 38.5mA |
| Application Temperature Range | -30°C to +55°C |
| Humidity | 0 to 95% Relative Humidity (non condensing) |
| IP Rating | IP54 |
| Height | 254mm, 6500-SMK backbox 230mm |
| Diameter | 84mm |
| Width | Detector 190mm, 6500-SMK backbox 178mm |
| Weight | 1.77kg |
| Max Wire Gauge for Terminals | 2.5mm2 |
| Colour | White trim, black box |
| Material | Trim - Bayblend FR110, Lens cover - Lexan, Backbox - Noryl |
| Reflector | 200 x 230mm (5 to 70m range, supplied as standard) |
Specifications as published by System Sensor. Please confirm the exact model with us before ordering.
More System Sensor Beam Detectors
System Sensor 6500SE Addressable Reflected Beam Smoke Detector with Remote Test
The 6500 addressable beam detector with a servo-operated test filter, so both the optics and the electronics can be tested remotely.
System Sensor 6500RSE Conventional Reflected Beam Smoke Detector with Asuretest
The conventional 6500 beam detector with Asuretest, a servo-operated filter that tests both the optics and the electronics remotely.
System Sensor OSI-RE-SS Conventional Imaging Beam Smoke Detector
A conventional reflector-type beam detector with a CMOS imaging receiver, built to tolerate building movement and strong light.
System Sensor OSI-RIE-xx Intelligent Imaging Beam Smoke Detector
An addressable reflector-type beam detector for panels using Advanced Protocol or CLIP mode communication, supplied with an 8 inch reflector.
System Sensor BEAM1224 4-Wire Conventional Beam Smoke Detector
A 4-wire conventional single-ended reflective beam detector with an 8 inch reflector, aligned with an optical sight and a two-digit signal strength meter.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.