Dealer for BoschA white base for the OOH740-A9-Ex dual-optical detector used in potentially explosive areas, holding the detector with a snap fastener.
| Specification | FDB201 |
|---|---|
| Wire diameter (mm) | 1.3820 |
| Color | White |
Specifications as published by Bosch. Please confirm the exact model with us before ordering.
A white plastic detector base for surface or flush cable entry, listed by Bosch as a base for AVENAR detector 4000 and FCP-320 detectors. The MS 400 is unbranded and the MS 400 B carries the Bosch logo.
A detector base with a built-in change-over relay, listed by Bosch as an accessory for AVENAR detector 4000 detectors, for detector points that must switch a local device.
The LSN base that Bosch states is required to install FAP-520 fire detectors.
The relay version of the FAA-500 base, used to install FAP-520 detectors in special applications such as emergency door control in line with DIBt rules.
A 4 inch standard European flangeless mounting base for a plain detector position, UL/ULC listed.
A sounder base that takes the same address as its detector but uses its own device type on the loop, and recognises the System Sensor synchronisation protocol.
The plug-in base for Morley Advanced intelligent sensor ranges, in the ivory version. The standard MI-B501AP is white and the BK version is black.
The standard base for System Sensor 500, 200, 200+ and 200 Advanced intelligent sensors, with a tamper-resistant option and a break-off address tag.
A two-wire heated base for System Sensor 200 analogue addressable detectors, used where frost or condensation could otherwise cause false alarms.
A universal detector base that fits all Apollo detectors in the Soteria, Discovery and XP95 ranges. It supports isolated and non-isolated devices and has a wide interior for easy access to cables and terminals.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
