Siemens DB722 Cerberus PRO Detector Base
A universal base with a detector base seal and screwless terminals for all Cerberus PRO FD720 addressable point detectors.
Dealer for SiemensSiemens DB721 Cerberus PRO Detector Base with Loop Contact
A universal base for all Cerberus PRO FD720 point detectors with a loop contact that keeps the detector line closed when no detector is mounted.
- Loop contact: the detector line is not interrupted without a detector
- Extra large mounting slots suit a wide range of back boxes
- Space for auxiliary terminals: 2x DBZ1190-AA and 2x DBZ1190-AB
- Back entry for recessed wiring; 2 side breakouts for surface cables up to 8 mm
- Pure white (~RAL 9010); Siemens lists VdS
Standards and approvals: VdS
Specifications
Specifications
| Specification | DB721 |
|---|---|
| Cable capacity | 0.2...1.6 mm2 |
| Color | Pure white, ~RAL 9010 |
| Dimensions (Ø x H) | 117 x 23 mm |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Detector Bases
Siemens FDB221-AA Sinteso Addressable Detector Base with Micro Terminal
An addressable detector base in impact-proof plastic with one micro terminal for screened cable, for Sinteso detectors.
Siemens FDB222 Sinteso Flat Addressable Detector Base
A flat base for Sinteso detectors with addressable signal processing, in impact-proof plastic, also offered in other colours.
Siemens DB110D Cerberus FIT Conventional Detector Base
A conventional (collective) base with a continuity diode for all Siemens 110-series point detectors, which selects parameter set 1 in the detector.
Detector Bases from other brands
Notifier
Notifier B501-WHITE Flangeless Detector Mounting Base, 4 inch
A 4 inch standard European flangeless mounting base for a plain detector position, UL/ULC listed.
Notifier
Notifier B200S-WHITE Intelligent Sounder Base
A sounder base that takes the same address as its detector but uses its own device type on the loop, and recognises the System Sensor synchronisation protocol.
Morley by Honeywell
Morley by Honeywell MI-B501AP Detector Base, Ivory (MI/B501AP/IV)
The plug-in base for Morley Advanced intelligent sensor ranges, in the ivory version. The standard MI-B501AP is white and the BK version is black.
System Sensor
System Sensor B501AP Addressable Detector Base
The standard base for System Sensor 500, 200, 200+ and 200 Advanced intelligent sensors, with a tamper-resistant option and a break-off address tag.
System Sensor
System Sensor B524HTR Analogue Heater Base
A two-wire heated base for System Sensor 200 analogue addressable detectors, used where frost or condensation could otherwise cause false alarms.
Apollo
Apollo XPERT 8 Base (Soteria, Discovery and XP95)
A universal detector base that fits all Apollo detectors in the Soteria, Discovery and XP95 ranges. It supports isolated and non-isolated devices and has a wide interior for easy access to cables and terminals.