Dealer for BoschA conventional single action (type A) call point with glass pane for indoor surface mounting on conventional fire alarm systems.
Standards and approvals: CMIM
| Specification | FMC-300RW-GSGRD |
|---|---|
| Operating voltage (VDC) | 8.5 to 30 |
| Operating temperature (°C) | -25 to 70 |
| Dimensions (H x W x D) (mm) | 87 x 87 x 56 |
| IP rating | IP54 |
| Color | Red |
| Color (RAL) | RAL 3031 Orient red |
| Material | Plastic |
Specifications as published by Bosch. Please confirm the exact model with us before ordering.
An analog addressable single action (type A) call point for indoor surface mounting on Bosch LSN and LSN improved systems, in a glass pane version or a resettable version.
The flush-mount version of the FMC-420RW analog addressable single action call point for indoor use, in a glass pane version or a resettable version.
The outdoor version of the FMC-420RW analog addressable single action call point, surface mounted and rated IP67, in a glass pane version or a resettable version.
An analog addressable double action (type B) call point with glass pane for Bosch LSN and LSN improved systems, as the indoor form G (FMC-210-DM-G-R) or the outdoor form H (FMC-210-DM-H-R).
An analog addressable single action (type A) call point with glass pane for indoor use on Bosch LSN and LSN improved systems.
A resettable conventional single action (type A) call point for indoor surface mounting on conventional fire alarm systems.
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
