Notifier NOT-MCP-G-I Addressable Manual Call Point
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
Dealer for NotifierNotifier NBG-12LX Addressable Dual-Action Pull Station
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
- Addressable, with captive screw terminals ready for the SLC loop
- Smooth dual-action operation
- Surface mounting with an SB-10 or SB-I/O back box, or semiflush mounting
- 24 VDC normal operating voltage, 28.0 VDC maximum loop voltage
- Operating range 0°C to 49°C
- UL/ULC listed and FM approved, with CSFM, MEA, FDNY, U.S. Coast Guard and Lloyd's Register listings
Standards and approvals: UL/ULC Listed: S692 (listed for Canadian and non-Cana- dian applications), MEA: 67-02-E, CSFM: 7150-0028:0199, FDNY: COA #6085 (NFS2-640), COA #6098 (NFS2-3030), BSMI: CI313066760047, U.S. Coast Guard, Lloyd’s Register, FM Approved
Specifications
Specifications
| Specification | Details |
|---|---|
| Shipping Weight | 9.6 oz. (272.15 g) |
| Normal operating voltage | 24 VDC. |
| Maximum SLC loop voltage | 28.0 VDC. |
| Maximum SLC standby current | 375 µA. |
| Maximum SLC alarm current | 5 mA. |
| Temperature Range | 32°F to 120°F (0°C to 49°C) |
| Relative Humidity | 10% to 93% (noncondensing) • For use indoors in a dry location |
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Manual Call Points & Pull Stations
Notifier NBG-12 Series Non-Coded Manual Pull Stations
A series of non-coded manual fire alarm pull stations in single-action and dual-action versions, with hex-key and key-lock models, designed with the installer and the end user in mind.
Notifier XAL-53 Explosion-Proof Pull Station
An explosion-proof pull station for hazardous areas and for places where fire alarm or signal circuits need emergency manual control.
Notifier NBG-12LR Series Dual-Action Agent Release Stations
Non-coded, dual-action agent release stations (NBG-12LR, NBG-12LRA and NBG-12LRAA) for Notifier fire alarm panels with releasing capability and RP Series releasing systems.
Manual Call Points from other brands
Morley by Honeywell
Morley by Honeywell HM-MCP-G-UL-I Addressable Break Glass Manual Call Point (Morley UL)
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
System Sensor
System Sensor MCP2A Conventional Indoor Manual Call Point, Red (with or without Backbox)
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
System Sensor
System Sensor MUS3A/Y000FF/11 Single-Pole Flexi-Element Manual Call Point, without Backbox
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
Apollo
Apollo Intelligent Manual Call Point, Red, with Isolator
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.
Apollo
Apollo Intelligent Manual Call Point, Green (Door Release)
A green addressable call point commonly used to release secure doors or barriers by hand in an emergency. It works with XP95, Discovery and CoreProtocol.
Ceasefire
Ceasefire Intelli-Sense Addressable Manual Call Point (TI-002226 and TI-002431)
Single action push button call point for addressable loops, with a built-in short circuit isolator and a resettable operating element. Approved to EN 54-11 and EN 54-17 and certified by LPCB; TI-002431 is the new variant.