Notifier NBG-12LX Addressable Dual-Action Pull Station
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
Dealer for NotifierNotifier NBG-12 Series Non-Coded Manual Pull Stations
A series of non-coded manual fire alarm pull stations in single-action and dual-action versions, with hex-key and key-lock models, designed with the installer and the end user in mind.
- Push in, pull down handle that latches once operated
- Meets UL 38 and the ADA 5 lb maximum pull force
- Gold-plated switch contacts rated 0.25 A at 30 VAC or VDC
- Four-position terminal strip moulded into the backplate
- Surface or semiflush mounting
- C(UL)US listed and CSFM approved; FM approved except the NBG-12LPS and NBG-12LPSP
Standards and approvals: C(UL)US Listed: file S692, CSFM approved: file 7150-0028:199, FM approved (except NBG-12LPS, NBG-12LPSP), MEA approved: file 67-02-E (NBG-12, NBG-12L, NBG-12LOB, NBG-12LA), Lloyd’s Register type approved: file 93/60141 (E3), U.S. Coast Guard approved: files 161.002/23/3 (AFP-200, Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772; 6,632,108
Specifications
Specifications
| Specification | Details |
|---|---|
| Switch contact ratings | gold-plated; rating 0.25 A @ 30 VAC or VDC. Auxiliary contact circuit (Terminals 3 & 4, |
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Manual Call Points & Pull Stations
Notifier NOT-MCP-G-I Addressable Manual Call Point
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
Notifier XAL-53 Explosion-Proof Pull Station
An explosion-proof pull station for hazardous areas and for places where fire alarm or signal circuits need emergency manual control.
Notifier NBG-12LR Series Dual-Action Agent Release Stations
Non-coded, dual-action agent release stations (NBG-12LR, NBG-12LRA and NBG-12LRAA) for Notifier fire alarm panels with releasing capability and RP Series releasing systems.
Manual Call Points from other brands
Morley by Honeywell
Morley by Honeywell HM-MCP-G-UL-I Addressable Break Glass Manual Call Point (Morley UL)
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
System Sensor
System Sensor MCP2A Conventional Indoor Manual Call Point, Red (with or without Backbox)
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
System Sensor
System Sensor MUS3A/Y000FF/11 Single-Pole Flexi-Element Manual Call Point, without Backbox
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
Apollo
Apollo Intelligent Manual Call Point, Red, with Isolator
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.
Apollo
Apollo Intelligent Manual Call Point, Green (Door Release)
A green addressable call point commonly used to release secure doors or barriers by hand in an emergency. It works with XP95, Discovery and CoreProtocol.
Ceasefire
Ceasefire Intelli-Sense Addressable Manual Call Point (TI-002226 and TI-002431)
Single action push button call point for addressable loops, with a built-in short circuit isolator and a resettable operating element. Approved to EN 54-11 and EN 54-17 and certified by LPCB; TI-002431 is the new variant.