System Sensor MUS3A/Y000FF/11 Single-Pole Flexi-Element Manual Call Point, without Backbox
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
Dealer for System Sensor
System Sensor MCP2A Conventional Indoor Manual Call Point, Red (with or without Backbox)
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
- Plug and play terminal block, no re-termination needed
- Break glass or resettable by changing the element
- LED indicator, resistor and normally open clean contact options
- 30VDC maximum, 2 Amps current rating
- IP24D, PC/ABS body in red RAL 3001
- 110g flush, 160g surface
Specifications
Specifications
| Specification | MCP2A/R470FF/01 | MCP2A/R470SF/01 |
|---|---|---|
| Connection Details: | See Figure .1 | See Figure .1 |
| Cable Termination: | 0.5-2.5mm2 | 0.5-2.5mm2 |
| Maximium Voltage: | 30VDC | 30VDC |
| Current Rating: | 2 Amps | 2 Amps |
| Humidity: | 0-95% non-condensing | 0-95% non-condensing |
| Ingress Protection (IP) Rating: | IP24D | IP24D |
| Material: | PC/ABS | PC/ABS |
| Weight: | 110g Flush | 160g Surface | 110g Flush | 160g Surface |
| Colour: | Red, Ral 3001 | Red, Ral 3001 |
| Model | MCP2A/R470FF/01 | MCP2A/R470SF/01 |
| Description | Conv. MCP, Red, with LED ,470 Ohm, W/O Back Box, India | Conv. MCP, Red, with LED, 470 Ohm, with BB, India |
Specifications as published by System Sensor. Please confirm the exact model with us before ordering.
More System Sensor Manual Call Points
System Sensor MUS4A/Y000SF/12 Dual-Pole Flexi-Element Manual Call Point, with Backbox
A dual-pole flexi-element call point supplied with a backbox for surface mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
System Sensor MUS3A/G000SF/12 Flexi-Element Manual Call Point, with Backbox
A flexi-element call point supplied with a backbox for surface mounting, with a plug and play terminal block and a choice of break glass or resettable operation. Confirm the contact arrangement with FPS when ordering.
System Sensor MUS4A/G000SF/12 Flexi-Element Manual Call Point, with Backbox
A flexi-element call point supplied with a backbox for surface mounting, with a plug and play terminal block and a choice of break glass or resettable operation. Confirm the contact arrangement with FPS when ordering.
System Sensor J-SAB-M-M500KEIS Intrinsically Safe Weatherproof Conventional Call Point
An intrinsically safe break glass call point for 2-wire fire alarm systems in hazardous environments where combustible gas is present. It connects to a compatible panel or through a monitoring module.
Manual Call Points from other brands
Notifier
Notifier NBG-12LX Addressable Dual-Action Pull Station
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
Notifier
Notifier NOT-MCP-G-I Addressable Manual Call Point
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
Morley by Honeywell
Morley by Honeywell HM-MCP-G-UL-I Addressable Break Glass Manual Call Point (Morley UL)
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
Apollo
Apollo Intelligent Manual Call Point, Red, with Isolator
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.
Apollo
Apollo Intelligent Manual Call Point, Green (Door Release)
A green addressable call point commonly used to release secure doors or barriers by hand in an emergency. It works with XP95, Discovery and CoreProtocol.
Ceasefire
Ceasefire Intelli-Sense Addressable Manual Call Point (TI-002226 and TI-002431)
Single action push button call point for addressable loops, with a built-in short circuit isolator and a resettable operating element. Approved to EN 54-11 and EN 54-17 and certified by LPCB; TI-002431 is the new variant.