Ravel Conventional Photoelectric Smoke and Heat Detector
A conventional multi sensor detector that combines a photoelectric smoke sensor with a heat sensor, on a regular 100 mm base.
Dealer for RavelRavel Conventional Photoelectric Smoke Detector
A conventional photoelectric smoke detector with dual LEDs and a low profile housing on a regular 100 mm base.
- Photoelectric smoke detection
- Dual LEDs visible through 360°
- 9 to 33 V DC operation
- Operating temperature -10 °C to 37.8 °C, IP42
- Low profile housing on a regular 100 mm base
- Ravel states UL listing
Standards and approvals: UL
Specifications
Specifications
| Specification | RE 316S: 2L |
|---|---|
| Operating Voltage | 9 ~ 33V DC |
| Operating Temperature | -10 °C to 37.8 °C |
| Storage Temperature | -10 °C to 60 °C |
| Humidity | 0 to 95% RH, non-condensing |
| Reset Voltage | less than 1V |
| Standby Current | -50 μA. |
| Start up Time | 60s. |
| Start-Up Current | 170 μA. |
| Alarm Current | 90 mA.(Max). |
| Remote Output | 15mA maximum open collector |
| Smoke Sensitivity | (1.96 ± 0.76) % / ft |
| Air Velocity | 0 to 4000 fpm. |
| Cycle time | 5 Sec |
| Installation Space | 5 meters |
| Height | 46 mm with base |
| Diameter | 100 mm dia |
| Weight | 130g with base |
| IP Rating | IP: 42 |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Conventional Detectors
Ravel Conventional Heat Detector
A conventional heat detector that alarms at 59 °C or on a fast temperature rise, with polarity free wiring.
Ravel RE-326 Series Conventional Smoke and Heat Detectors
A conventional detector series in seven ordering versions, covering smoke and heat models, relay contact outputs and an auto reset version.
Smoke and Heat Detectors from other brands
Honeywell
Honeywell FDC-101 Wi-Fi Smoke Detector (IMPACT by Honeywell)
A battery operated, Wi-Fi enabled photoelectric smoke detector from the IMPACT by Honeywell range. When smoke reaches its alarm threshold it sounds a buzzer, flashes an LED and sends real-time alerts to a smartphone through the IMPACT by Honeywell app.
Honeywell
Honeywell SSD-100 Standalone Smoke Detector (IMPACT by Honeywell)
A battery operated standalone smoke alarm with photoelectric sensing that sounds an alarm and lights a red LED when smoke reaches its threshold. It runs on two AA batteries and also warns of a low battery or a chamber fault.
Notifier
Notifier FSP-951 Intelligent Photoelectric Smoke Detector
An intelligent addressable photoelectric smoke detector with an optical chamber that senses smoke from a wide range of fires, and sensitivity that is programmable and monitored by the panel.
Notifier
Notifier FSP-951T Photoelectric Smoke Detector with Thermal Sensing
An intelligent photoelectric smoke detector with dual thermistors that add 135°F (57°C) fixed temperature heat sensing in the same head.
Morley by Honeywell
Morley by Honeywell HM/PSE/S2 Photoelectric Smoke Detector (DXc and ZXSe)
An S200A plug-in photoelectric smoke detector listed with the DXc and ZXSe panels. Its detection chamber is designed to cut false alarms from dust, insects and other debris.
Morley by Honeywell
Morley by Honeywell HM/PTSE Photo-Thermal Multi-Criteria Detector (DXc and ZXSe)
An S200A multi-criteria detector that adds 58°C fixed temperature and rate of rise thermal sensing to a photoelectric smoke sensor, for better false alarm immunity and faster response to a wide range of fires.