Siemens OH110 Cerberus FIT Conventional Multi-Sensor Fire Detector
A conventional multi-sensor detector for flaming fires from liquids and solids and for smouldering fires, built for rooms with deceptive phenomena.
Dealer for SiemensSiemens OP110 Cerberus FIT Conventional Optical Smoke Detector
A conventional (collective) optical smoke detector for smoke from flaming and smouldering fires, with two selectable parameter sets.
- Detects smoke from flaming and smouldering fires
- Parameter set 1 (Standard) or parameter set 2 (Sensitive)
- DC 16 to 28 V, quiescent current max. 100 μA
- Operating temperature -10 to 55 °C
- IP40, IP42 with base seal, IP44 with wet base attachment
- Supplied with a dust cap; Siemens lists EN 54-7, VdS and UKCA
Standards and approvals: EN 54-7, VdS, UKCA
Specifications
Specifications
| Specification | OP110 |
|---|---|
| Operating voltage | DC 16…28 V |
| Standard | EN 54-7 |
| Operating temperature | -10…55 °C |
| Protection category | IP40; IP42 with detector base seal; IP44 with base attachment wet |
| Storage temperature | -30...+70 °C |
| Relative humidity | ≤96 % rel. |
| Color | Pure white, ~RAL 9010 |
| Quiescent current | Max. 100 μA |
| Communication protocol | Collective/Conventional |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Conventional Detectors
Siemens HI110 Cerberus FIT Conventional Heat Detector, Differential
A conventional differential heat detector for areas with heavy dust, dirt or moisture where smoke detectors may give false alarms.
Siemens HI112 Cerberus FIT Conventional Heat Detector, Static
A conventional static (fixed temperature) heat detector for areas with dirt or temperature swings that can cause false alarms from smoke detectors.
Smoke and Heat Detectors from other brands
Honeywell
Honeywell FDC-101 Wi-Fi Smoke Detector (IMPACT by Honeywell)
A battery operated, Wi-Fi enabled photoelectric smoke detector from the IMPACT by Honeywell range. When smoke reaches its alarm threshold it sounds a buzzer, flashes an LED and sends real-time alerts to a smartphone through the IMPACT by Honeywell app.
Honeywell
Honeywell SSD-100 Standalone Smoke Detector (IMPACT by Honeywell)
A battery operated standalone smoke alarm with photoelectric sensing that sounds an alarm and lights a red LED when smoke reaches its threshold. It runs on two AA batteries and also warns of a low battery or a chamber fault.
Notifier
Notifier FSP-951 Intelligent Photoelectric Smoke Detector
An intelligent addressable photoelectric smoke detector with an optical chamber that senses smoke from a wide range of fires, and sensitivity that is programmable and monitored by the panel.
Notifier
Notifier FSP-951T Photoelectric Smoke Detector with Thermal Sensing
An intelligent photoelectric smoke detector with dual thermistors that add 135°F (57°C) fixed temperature heat sensing in the same head.
Morley by Honeywell
Morley by Honeywell HM/PSE/S2 Photoelectric Smoke Detector (DXc and ZXSe)
An S200A plug-in photoelectric smoke detector listed with the DXc and ZXSe panels. Its detection chamber is designed to cut false alarms from dust, insects and other debris.
Morley by Honeywell
Morley by Honeywell HM/PTSE Photo-Thermal Multi-Criteria Detector (DXc and ZXSe)
An S200A multi-criteria detector that adds 58°C fixed temperature and rate of rise thermal sensing to a photoelectric smoke sensor, for better false alarm immunity and faster response to a wide range of fires.