Agni makes conventional smoke, heat and multi sensor detectors for zone based fire alarm panels: QS models with two 360 degree LEDs, and low profile models with a bi-colour status LED. FPS, an Agni dealer, supplies, installs and maintains them in Bhopal and across Madhya Pradesh.
A conventional smoke cum heat detector for open area protection that senses both smoke and temperature, with a heat alarm point of 57 °C. It is designed for use with most conventional fire alarm panels.
A conventional photoelectric smoke detector for open area protection, suited to the dense smoke of smouldering fires in soft furnishings, plastics and foam. It is designed for use with most conventional fire alarm panels.
A conventional heat detector that raises the alarm when the surrounding air reaches its preset temperature. It is meant for places where smoke detectors could give false alarms because of dust, fumes, steam or normal smoke.
A low profile conventional detector that combines smoke sensing with thermal sensing, which Agni calls a photo thermal detector. It has a bi-colour status LED and a remote alarm test feature.
A low profile conventional photoelectric smoke detector with a bi-colour status LED, low current draw and a remote alarm test feature.
A low profile conventional heat detector that responds to a fast rise in temperature, with a bi-colour status LED and a remote alarm test feature.
A 4 wire conventional smoke detector with an optical sensing chamber, designed for open area protection and for use with most conventional fire alarm panels.
A conventional detector is wired with others on a zone circuit, and the panel shows which zone is in alarm rather than the exact detector. Agni's QS models are designed for open area protection and for use with most conventional fire alarm panels.
Choose smoke or heat to suit the room. Photoelectric (optical) smoke detectors suit the dense, visible smoke from slow smouldering fires in soft furnishings, plastics and foam. Heat detectors suit kitchens, boiler and generator rooms, parking areas and workshops, where dust, fumes or steam could set off a smoke detector: the QS951-2L works on a fixed temperature, and the AD318-2L is a rate of rise detector that responds to a fast climb in temperature. Multi sensor detectors combine smoke and heat sensing in one head.
The QS models have two LEDs for 360 degree indication. The LEDs flash every six seconds while the detector is powered and working, latch on in alarm and go off in a trouble condition, and the detector is reset by a brief power interruption from the panel. The QS388 models run on 9 to 33 V DC, non-polarized, so the two wires can be connected either way round. The low profile models (AD338-2HL, AD318-2L and a low profile photoelectric smoke detector) have a bi-colour status LED, low current draw and a remote alarm test feature.
The QS388-4L is a 4 wire version of the photoelectric smoke detector, for panels or interfaces that need separate power and alarm wiring. Tell us which panel you have and FPS will confirm the right detector, with a price on request.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
