Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Dealer for Morley by Honeywell
Morley by Honeywell Networking, Communication and Graphics Software in Bhopal
Fire Protection System (FPS), a Morley dealer in Bhopal, supplies Morley-IAS network and communication cards for DXc and ZXSe panels, TG and ZXSe graphic management software and the Morley Max Modbus link. FPS installs, configures and maintains them across Madhya Pradesh.
Where to use Networking & Graphics
- Sites with several networked fire alarm panels
- Large sites with network runs of up to 12 km (Hi-485)
- Control rooms that supervise one or more panels from a PC
- Links to a building management system (BMS)
- SCADA integration through TGP-Modbus
- Supervisory systems that use Modbus/TCP (Morley Max)
- Remote panels linked over a modem and a leased or private line (RS232)
- Commercial buildings, offices, hotels and hospitals
Morley by Honeywell Networking & Graphics models
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.
Morley by Honeywell TG Graphic Management Software for DXc Panels
PC software that manages incidents in one or more DXc panels and shows the condition of each sensor graphically in real time.
Morley by Honeywell ZXSe RS485 Communication Module (795-004-001)
A two-wire RS485 multi-drop communication card for ZXSe panels, linking networked panels, repeaters or serial peripheral devices.
Morley by Honeywell ZXSe RS232 Communication Module (795-005)
An RS232 card for single point-to-point communication between ZX series panels, or between a ZX2Se or ZX5Se panel and a graphic front end.
Morley by Honeywell ZXSe Hi-485 Communication Module, PCB Only (795-038-001)
A high integrity network module for ZXSe panels that detects and isolates network wiring faults and acts as a signal repeater, so network loops of up to 12 km can be built.
Morley by Honeywell ZXSe Graphic Management and Configuration Software (AMX)
Software for ZXSe systems with AUTOLEARN device detection, an offline Windows configuration tool, cause and effect programming and AMX graphics licences for one or up to three panels.
Morley by Honeywell TG Graphic Management Software for Morley Max
Graphic terminal software for a PC that supervises one or more Morley Max fire alarm control panels and lets operators manage any incident quickly.
Morley by Honeywell Max Modbus Interface Licence (E-SIB-M)
A hardware enablement key that adds a Modbus/TCP link between supervisory systems and a network of Morley Max fire alarm control panels.
How to choose
Networking lets several Morley panels work as one system. On DXc panels a 795-099 network card must be fitted to each panel in the network, and the 795-122 RS232 card connects a serial device such as a BMS (building management system) or AMX fire graphics software. On ZXSe panels, the 795-004-001 RS485 module gives two-wire multi-drop links between panels, repeaters and serial peripherals; the 795-005 RS232 module gives single point-to-point links, including remote panels over a modem and a leased or private line; and the 795-038-001 Hi-485 module, used with an RS485 card, detects and isolates network wiring faults and boosts the signal for high integrity loops of up to 12 km.
Graphic management software shows each device on building plans on a PC, so operators can see where an event is and act on it. The TG software for DXc and Max panels shows points with icons, instructions and sounds, offers access levels, history and control options such as mute, reset and evacuation, and connects over RS-232 up to 15 metres or over IP or an intranet; TGP-Modbus links it to SCADA. The ZXSe software includes AUTOLEARN device detection, an offline Windows configuration tool and AMX licences for one panel (Level 1) or up to three panels (Level 2).
For Morley Max networks, the E-SIB-M Modbus licence key links a Max panel network to supervisory systems that use Modbus/TCP. FPS supplies, installs, configures and maintains Morley networking and graphics in Bhopal and across Madhya Pradesh.
Frequently asked questions
How do I network DXc panels?
Fit a DXc network card (795-099) to each panel in the network. DXc panels can network up to 16 loops.
What does the Hi-485 module do?
It works with an RS485 card in a ZXSe panel, detects and isolates short and open circuits on the network wiring, and acts as a signal repeater so high integrity loops of up to 12 km can be built.
Can a Morley panel connect to a BMS?
Yes. The DXc RS232 card connects a serial device such as a BMS or AMX fire graphics software, TGP-Modbus links the TG software to SCADA, and the Max Modbus licence (E-SIB-M) links a Max network to Modbus/TCP supervisory systems.
What is TG graphic software?
It is a PC application that shows the condition of each sensor graphically in real time and lets operators manage incidents in one or more panels. For Morley Max, the TG-BASE licence comes on a USB key.
Does FPS set up Morley networks and graphics in Bhopal?
Yes. FPS is a Morley dealer and supplies, installs, configures and maintains Morley network cards, communication modules and graphics software in Bhopal and across Madhya Pradesh. Prices are on request: call or WhatsApp +91 92440 89060.