System Sensor InnovairFlex D2E Conventional Duct Smoke Detector
A conventional 2-wire photoelectric duct smoke detector with integrated low-flow technology and modular construction, fitted with a Series 300 conventional detector base.
Dealer for System Sensor
System Sensor DST Sampling Tubes for Duct Smoke Detectors
Steel sampling tubes with holes drilled along their length that carry duct air to the detector. Each size suits a range of duct widths, and the tube is bought separately from the detector.
- Compatible with conventional and addressable duct detectors
- DST1 for ducts up to 0.3 m, DST1.5 for 0.3 to 0.6 m
- DST3 for 0.6 to 1.2 m, DST5 for 1.2 to 2.4 m, DST10 for 2.4 to 3.7 m
- Should extend at least 5/8 of the way across the duct
- Installed with the air inlet holes facing into the airflow
Specifications
System Sensor has not published a specification table for this model. Ask us for the data sheet.
Specifications as published by System Sensor. Please confirm the exact model with us before ordering.
More System Sensor Duct Smoke Detectors
System Sensor InnovairFlex DNRE Intelligent Duct Smoke Detector
An intelligent, non-relay photoelectric duct smoke detector for addressable systems, fitted with a base for Series 200 intelligent detectors.
System Sensor InnovairFlex D2 2-Wire Photoelectric Duct Smoke Detector
A 2-wire photoelectric duct smoke detector with a pivoting housing that fits square or rectangular footprints on round or rectangular ductwork.
System Sensor InnovairFlex D4120 4-Wire Duct Smoke Detector, 120 VAC
A 4-wire photoelectric duct smoke detector for 120 VAC, with a pivoting housing, a Test/Reset button and a patented interconnect feature for multi-fan shutdown.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.