Dealer for NotifierThe next-generation network control annunciator with a 10 inch colour touch screen, compatible with INSPIRE N16e/x and ONYX NFS2-3030, NFS2-640 and NFS-320 nodes.
Notifier has not published a specification table for this model. Ask us for the data sheet.
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
An ONYX ACS annunciator with 24 colour-programmable Active LEDs, 24 yellow Trouble LEDs and 24 touch-pad switches, plus a local sounder, for ONYX panels, network control annunciators and legacy addressable panels.
An expander that adds 24 system points to the ACM-24AT, matching it in size and front appearance, with up to three per annunciator for 96 points in all.
An ONYX ACS annunciator with 48 colour-programmable Active LEDs, a local sounder with silence switch, and System Trouble and On-Line/Power LEDs.
An expander that adds 48 system points to the ACM-48A, matching it in size and front appearance, for 96 points in all.
A second-generation network control annunciator for NOTI-FIRE-NET and High Speed NOTI-FIRE-NET, giving control and display for all or selected network nodes.
An 80-character backlit LCD annunciator for the NFS2-640, NFS2-3030, NFS-320, NCA-2 and legacy panels, giving remote reset, acknowledge, drill and silence.
The compact EN version of Honeywell's HS-81 fire and gas controller, with a single or double power supply, for industrial sites where space is tight. It handles flame, gas and smoke detection, logic control, extinguishing release and alarm outputs from one panel.
The compact UL version of Honeywell's HS-81 fire and gas controller, with a single or double power supply, for industrial sites where space is tight. Like the EN version, it combines flame, gas and smoke detection, logic control, extinguishing release and alarm outputs in one panel.
A one loop, networkable analogue addressable panel from the Morley EN DXc range that uses the Morley protocol. It works on its own or in a network of DXc panels up to 16 loops.
A two loop, multi-protocol analogue addressable panel from the DXc range that supports the Morley protocol and networks with other DXc panels up to 16 loops.
Sizes: 2 Zone to 32 Zone
Microprocessor based fire alarm control panel with a backlit LCD, in 2, 4, 8, 16 and 32 zone versions, in a powder coated MS cabinet. Each zone shows fire, open, short and isolate, and Soft-Chip states it follows IS 2189:1999.
Cloud based fire alarm control panel with built-in Wi-Fi and an RJ45 LAN port, so panel health and zone alarms can be seen and controlled from the Soft-Chip Smart Alert app as well as on site. Status refreshes in less than 60 sec.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
