Dealer for SiemensAn addressable call point with direct actuation by glass insert for indoor and outdoor use, built from a separate housing and switching unit.
Standards and approvals: EN 54-11, EN 54-17, VdS, DNV, MED, LPCB
| Specification | FDM224__ |
|---|---|
| Operating temperature | -25...+70 °C |
| Relative humidity | ≤95 % rel. (no condensation) |
| Standard | EN 54-11 , EN 54-17 |
| Dimensions (W x H x D) | 134 x 134 x 43 mm |
| Quiescent current | 200 μA |
| Storage temperature | -30...+75 °C |
| Communication protocol | FDnet/C-NET |
| Ext. alarm indicator | 2 |
| System compatibility | FDnet -> FS20, AlgoRex, SIGMASYS C-NET -> FS720 |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
An indoor addressable call point for FDnet and C-NET lines with direct actuation, offered with a resettable plastic element (RP) or a glass insert (RG).
An addressable call point with its housing base included and a resettable plastic element, rated IP66 for indoor and outdoor use.
An addressable call point with its housing base included and a glass insert, rated IP66 for indoor and outdoor use.
A complete addressable call point with a resettable plastic insert, back box, electronics and key FDMK231 in one item.
An addressable call point with direct actuation by glass insert for indoor and outdoor use, built from a separate housing and switching unit.
A complete addressable call point with a door and glass, where the user breaks the glass and presses the button, for indoor and outdoor use.
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
