Siemens FDM226-RP Cerberus PRO Addressable Manual Call Point with Housing Base, Resettable Plastic, IP66
An addressable call point with its housing base included and a resettable plastic element, rated IP66 for indoor and outdoor use.
Dealer for SiemensSiemens FDM225 Cerberus PRO Addressable Manual Call Point, Indoor (FDM225-RP Plastic, FDM225-RG Glass)
An indoor addressable call point for FDnet and C-NET lines with direct actuation, offered with a resettable plastic element (RP) or a glass insert (RG).
- RP: press the plastic element, reset with the key; RG: push in the glass insert, replace it to reset
- 1 address on FDnet/C-NET; DC 12 to 33 V; 180 μA quiescent
- For surface and recessed feed lines; back box FDMH295 needed for surface mounting
- IP44, flame red, 87 x 87 x 20 mm, -25 to 70 °C
- Siemens lists EN 54-11, EN 54-17, VdS, LPCB and UKCA
Standards and approvals: EN 54-11, EN 54-17, VdS, LPCB, UKCA
Specifications
Specifications
| Specification | FDM225-RP | FDM225-RG |
|---|---|---|
| Operating voltage | DC 12…33 V | DC 12…33 V |
| Operating temperature | -25…70 °C | -25…70 °C |
| Protection category | IP44 | IP44 |
| Relative humidity | ≤95 % rel. (no condensation) | ≤95 % rel. (no condensation) |
| Standard | EN 54-11 , EN 54-17 | EN 54-11 , EN 54-17 |
| Dimensions (W x H x D) | 87 x 87 x 20 mm | 87 x 87 x 20 mm |
| Quiescent current | 180 μA | 180 μA |
| Storage temperature | -30...+75 °C | -30...+75 °C |
| Terminal block | 0,28…1,5 mm2 | 0,28…1,5 mm2 |
| Communication protocol | FDnet/C-NET | FDnet/C-NET |
| Color | Flame red, ~RAL 3000 | Flame red, ~RAL 3000 |
| System compatibility | FDnet -> FS20, AlgoRex, SIGMASYS C-NET -> FS720 | FDnet -> FS20, AlgoRex, SIGMASYS C-NET -> FS720 |
| Number of addresses | 1 | 1 |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Manual Call Points
Siemens FDM226-RG Cerberus PRO Addressable Manual Call Point with Housing Base, Glass, IP66
An addressable call point with its housing base included and a glass insert, rated IP66 for indoor and outdoor use.
Siemens FDM231-RP Cerberus PRO Addressable Manual Call Point, Complete with Back Box
A complete addressable call point with a resettable plastic insert, back box, electronics and key FDMK231 in one item.
Siemens FDM221 Cerberus PRO Addressable Manual Call Point, Glass Insert, for Housing FDMH291
An addressable call point with direct actuation by glass insert for indoor and outdoor use, built from a separate housing and switching unit.
Siemens FDM223 Cerberus PRO Addressable Manual Call Point, Complete, Indirect Actuation
A complete addressable call point with a door and glass, where the user breaks the glass and presses the button, for indoor and outdoor use.
Siemens FDM224 Cerberus PRO Addressable Manual Call Point, Glass Insert, for Housing FDMH293
An addressable call point with direct actuation by glass insert for indoor and outdoor use, built from a separate housing and switching unit.
Manual Call Points from other brands
Notifier
Notifier NBG-12LX Addressable Dual-Action Pull Station
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
Notifier
Notifier NOT-MCP-G-I Addressable Manual Call Point
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
Morley by Honeywell
Morley by Honeywell HM-MCP-G-UL-I Addressable Break Glass Manual Call Point (Morley UL)
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
System Sensor
System Sensor MCP2A Conventional Indoor Manual Call Point, Red (with or without Backbox)
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
System Sensor
System Sensor MUS3A/Y000FF/11 Single-Pole Flexi-Element Manual Call Point, without Backbox
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
Apollo
Apollo Intelligent Manual Call Point, Red, with Isolator
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.