Apollo XP95 Flame Detector (IR3)
A loop powered addressable flame detector for areas where open flaming fires may be expected, sensing the low frequency flicker of infra-red radiation from flames. It works with the Discovery and XP95 protocols.
Authorised distributor for ApolloApollo Duct Detector Housing (XPERT 7)
A housing that holds an XP95 or Discovery detector to check the air moving through heating and ventilation (HVAC) ducts in commercial and industrial buildings. It gives early warning of smoke in the duct and helps stop smoke being circulated from a fire area to unaffected areas.
- Early smoke detection in HVAC ducts
- Helps prevent smoke re-circulating to areas the fire has not reached
- Used with an XP95 or Discovery detector
- XPERT 7 version
- 10 year warranty
Specifications
Specifications
| Specification | 53546-022APO |
|---|---|
| Warranty | 10 year |
Specifications as published by Apollo. Please confirm the exact model with us before ordering.
More Apollo Flame & Specialist Detection
Apollo XP95 Flame Detector (IR2)
An addressable flame detector with two sensors reading different IR wavelengths, so it can tell flames from other sources of radiation. It has a 90° field of view and covers up to 40 m.
Apollo XP95 Exd Flame Detector (IR3), Flameproof
A flameproof version of the XP95 IR3 flame detector for hazardous areas, sensing the flicker of infra-red radiation from open flaming fires. It is loop powered and works with the Discovery and XP95 protocols.
Apollo XP95 UV Flame Detector, Base Mounted
A compact UV flame detector that fits into a Discovery or XP95 base, for enclosed indoor areas where open fires may be expected. Its single UV sensor with a narrow spectral response reacts quickly to flames up to 25 m away, including steady flames with no flicker.
Apollo XP95 UV/IR2 Flame Detector, Base Mounted
A base mounted flame detector with one UV and two IR sensors, for open indoor areas such as aircraft hangars, generator rooms and paint works where open flaming fires may be expected. It fits into a Discovery or XP95 base.
Apollo Conventional Flame Detector (IR3)
A conventional flame detector for harsh indoor environments, with three sensors reading different IR wavelengths to separate flames from spurious radiation. It meets EN 54-10 Class 1, detecting a 0.1 m2 fire at 25 m.
Beam, Flame and Special Detectors from other brands
Honeywell
Honeywell Xtralis VESDA-E VEA Addressable Aspirating Smoke Detector
An aspirating smoke detector that draws air from separate sampling points through microbore tubes, so it can pinpoint the location of a fire threat. It has three sensitivity settings and an IP40 enclosure.
Honeywell
Honeywell Xtralis VESDA VLF-500 Aspirating Smoke Detector for Small Areas
A very early warning aspirating smoke detector for small, business-critical areas of less than 500 m2 (5,380 sq ft). It samples air continuously through a pipe network and detects very small amounts of smoke with light scattering.
Notifier
Notifier Intelligent VESDA-E VEP Aspirating Smoke Detector (SLC)
An aspirating smoke detector with a built-in SLC module that communicates directly with Notifier panels over the SLC loop, offered in one-pipe and four-pipe models (VEP-A00-1P-NTF-VN, VEP-A00-P-NTF-VN and VEP-A10-P-NTF-VN).
Notifier
Notifier Intelligent VESDA-E VES Sector Aspirating Smoke Detector (SLC)
An aspirating smoke detector with sector addressability for up to four sectors and a built-in SLC module for direct connection to Notifier panels (VES-A00-P-NTF-VN and VES-A10-P-NTF-VN).
Morley by Honeywell
Morley by Honeywell MI-LPB2-S3I Addressable Reflective Optical Beam Smoke Detector
An addressable reflector-type linear beam smoke detector that works on infra red light obscuration, for large open spaces such as warehouses and atriums. The combined transmitter and receiver connects directly to an analogue loop.
Morley by Honeywell
Morley by Honeywell MI-OSI-RIE Addressable Imaging Beam Smoke Detector
An intelligent reflector-type beam smoke detector that uses IR video imaging, for spacious rooms, open areas and high ceilings, with only one device to install and align.