Ravel TCP/IP Ethernet Module
An Ethernet module that connects a Ravel fire alarm panel to a computer network through an RJ45 port. Ravel lists it on both its multi loop and conventional pages.
Dealer for RavelRavel Avani CMS Central Monitoring Software
Central monitoring software for Avani addressable panels, showing all panels on one screen and allowing remote acknowledge, silence and reset.
- Status of all panels on one screen, with location and fire and fault counts
- Event log by panel or device, with real time clock
- Visual and sound alerts, separate tones for fire and fault
- User defined voice alert by loop and device
- Acknowledge, silence and reset the panel from the PC
- Ethernet or USB communication
Specifications
Specifications
| Specification | AVANI-CMS |
|---|---|
| Recommended Operating Systems | Windows 7 & 8 (‘Home’ package variants can be used if network connectivity is not required) |
| Monitor | Monitor (minimum 17” and support a screen resolution 1024 X 768 |
| Keyboard | Required |
| CD ROM Drive | Required for software installation |
| Disk Space | 40Gb Hard Drive (Minimum Recommended) |
| Backup Device | Backup device recommended (e.g. CDR, USB, ZIP disk) |
| USB Port | USB Port for communications with Graphics Interface. (Additional serial ports may be necessary if connectivity to other services are required) |
| Sound Card | Windows compatible soundcard & speakers / On-board sounder required for event notification |
| Memory | 2 GB RAM (Minimum Recommended) |
| Processor | Interl Pentium 4 Processor, 1.8 Ghz or higher |
| Options | Touch-Screen Monitor 17″ supporting a screen resolution of at least 1024 X 768 Any resolution above above 1024 X 768 can be supported however, Graphical bitmaps must be created in the appropriate format for the resolution selected. If monitors are to be used in Portrait manner a horizontal screen resolution of at least 950 pixels must be available. 1 X Additional Serial / USB port for communications with Touch Screen Controller |
| Pointing Device | A Mouse or Touch-Screen Monitor is essential Required |
| Graphics | XGA Graphics Accelerator supporting a minimum 1024 X 768 resolution |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Networking & Software
Ravel Addressable TCP/IP to Modbus Converter
A converter that carries the full detector, input and output details of an Avani addressable panel as Modbus over TCP/IP.
Ravel Addressable Modbus Converter
A Modbus converter that gives the full status of an Avani panel's detectors, inputs and outputs over RS232 or RS485.
Ravel Modbus Converter, Conventional Range
A Modbus converter listed in Ravel's conventional range that gives the full status of a panel's detectors, inputs and outputs over RS232 or RS485.
Ravel TCP/IP to Modbus Converter for RE-900 Series
A converter that carries Modbus over TCP/IP on an intranet or the internet, acting as the interface between an RE-900 series conventional panel and Modbus.
Ravel GSM Module for Avani Panels
A GSM module that sends fire alarm notifications with location details from an Avani panel to mobile phones.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.