Ravel TCP/IP Ethernet Module
An Ethernet module that connects a Ravel fire alarm panel to a computer network through an RJ45 port. Ravel lists it on both its multi loop and conventional pages.
Ravel
Dealer for RavelRavel TCP/IP to Modbus Converter for RE-900 Series
A converter that carries Modbus over TCP/IP on an intranet or the internet, acting as the interface between an RE-900 series conventional panel and Modbus.
- For RE-900 series conventional panels, 12 to 128 zones
- Full details of detectors, inputs and outputs
- RS 485 link, 10/100M auto sensing Ethernet
- TCP server and UDP modes, 24 V DC, IP50
- Ravel states CE approval
Standards and approvals: CE
Specifications
Specifications
| Specification | RE-90TMB |
|---|---|
| Operating Voltage | 24 VDC |
| Operating Temperature | 0°- 49°C / 32 - 120°F. |
| Storage Temperature | 0 - 60°C |
| Relative Humidity | 93 ± 2% RH (non-condensing) at 32 ±2°C / 96 ±3° F. |
| Standby current | 320mA (max). |
| Enclosure | Epoxy Powder coated |
| Communication Interface | RS485 / TCP-IP |
| IP Rating | IP50 |
| Size | (250L X 250H X 80D) mm. |
| Cable Entry | 6 X Ø 19mm Knockout in top of the cabinet. |
| Weight | 0.5 Kgs. |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Networking & Software
Ravel Addressable TCP/IP to Modbus Converter
A converter that carries the full detector, input and output details of an Avani addressable panel as Modbus over TCP/IP.
Ravel Addressable Modbus Converter
A Modbus converter that gives the full status of an Avani panel's detectors, inputs and outputs over RS232 or RS485.
Ravel Modbus Converter, Conventional Range
A Modbus converter listed in Ravel's conventional range that gives the full status of a panel's detectors, inputs and outputs over RS232 or RS485.
Ravel GSM Module for Avani Panels
A GSM module that sends fire alarm notifications with location details from an Avani panel to mobile phones.
Ravel GSM Voice Dialer
A GSM voice dialer for conventional systems that makes preconfigured voice calls and sends SMS alerts when triggered.
Fire Alarm Accessories and Test Equipment from other brands
Honeywell
Honeywell RI/007C Response Indicator for Fire Detectors
A remote indicator wired to a fire detector that is concealed or hard to see, so the source of an alarm can be found quickly. It works with conventional or addressable detectors.
Honeywell
Honeywell LCH CLSS Cloud Gateway and Monitoring Software
A gateway that links fire alarm panels, the cloud and peripherals, reading the panel's inventory data and passing it to licensed cloud software for remote monitoring and management.
Notifier
Notifier HS-NCM-W High-Speed Network Communication Module, Wire
Connects Notifier panels, NCA and NCA-2 annunciators and the DVC to High-Speed NOTI-FIRE-NET over twisted-pair wire, with up to 2 node addresses.
Notifier
Notifier HS-NCM-MF High-Speed Network Communication Module, Multi-Mode Fibre
Connects Notifier panels, annunciators and the DVC to High-Speed NOTI-FIRE-NET over multi-mode fibre-optic cable.
Morley by Honeywell
Morley by Honeywell DXc Network Card (795-099)
The card that connects DXc panels into a network. One is fitted to each panel, on the four studs at the left-hand side of the control panel.
Morley by Honeywell
Morley by Honeywell DXc RS232 Card (795-122)
An RS232 kit for DXc panels that connects a serial device, such as a BMS or AMX fire graphics software, through a third party protocol.